clutch problems
#1
Registered Member
Thread Starter
Join Date: Jun 2008
Location: chesapeake
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
clutch problems
I am having clutch problems and i need help, hence this post...one day i was driving and i notice that my pressure point on my clutch pedal has change it was in the middle, now its all the way down by the floor....could this mean my clutch is about to go, or do i have to adjust my clutch cable?
side notes.
2000 acura integra ls
kinda high rpms around 1200 at idle
any help would be useful..thanks
side notes.
2000 acura integra ls
kinda high rpms around 1200 at idle
any help would be useful..thanks
#2
Works on S2000's.
Join Date: Dec 2002
Location: VA
Posts: 3,023
Likes: 0
Received 0 Likes
on
0 Posts
Re: clutch problems
Clutch slave cylinder or clutch master cylinder.
You don't have a clutch cable, it's all hydraulic. Check the fluid, top it off, bleed it, and see if you can see which one is leaking. Look up under the dash, and look at the clutch pedal and see if there is brake fluid leaking inside, if so, it's the master cylinder.
You don't have a clutch cable, it's all hydraulic. Check the fluid, top it off, bleed it, and see if you can see which one is leaking. Look up under the dash, and look at the clutch pedal and see if there is brake fluid leaking inside, if so, it's the master cylinder.
#4
Registered Member
Join Date: Oct 2009
Location: Fredericksburg, VA
Posts: 913
Likes: 0
Received 0 Likes
on
0 Posts
Re: clutch problems
Clutch slave cylinder or clutch master cylinder.
You don't have a clutch cable, it's all hydraulic. Check the fluid, top it off, bleed it, and see if you can see which one is leaking. Look up under the dash, and look at the clutch pedal and see if there is brake fluid leaking inside, if so, it's the master cylinder.
You don't have a clutch cable, it's all hydraulic. Check the fluid, top it off, bleed it, and see if you can see which one is leaking. Look up under the dash, and look at the clutch pedal and see if there is brake fluid leaking inside, if so, it's the master cylinder.
Thread
Thread Starter
Forum
Replies
Last Post