Review: 3M Headlight Restoration Kit
#1
Review: 3M Headlight Restoration Kit
Ok.. So I have been looking to clean my hazed headlights for a while.. Finally found a kit worth buying.. Cheap as shit for a remarkable fix..
$21.99 at AutoZone.. HELLS YEA!
Video
Only took me about 15 mins on each of my headlights.. But I have pretty big ones lol.. But I would highly recommend this kit.. I haft to say I was IMPRESSED
Only things you need to supply are as followed
Finished!
It looked just like this.. but a little worse.
$21.99 at AutoZone.. HELLS YEA!
Video
Only took me about 15 mins on each of my headlights.. But I have pretty big ones lol.. But I would highly recommend this kit.. I haft to say I was IMPRESSED
Only things you need to supply are as followed
- Drill
- Tape
- Cloth
- Spray Bottle, or Hose with mist adjustable
Finished!
It looked just like this.. but a little worse.
Last edited by eXploited; 07-18-2009 at 02:40 PM.
#5
Re: Review: 3M Headlight Restoration Kit
reloadeds right on the durability part....
i own a body shop and we have done it and weeks later they are just as bad as they were...
and the products we use are not cheap...we dont even do it anymore...either replace it or just live with it...
i own a body shop and we have done it and weeks later they are just as bad as they were...
and the products we use are not cheap...we dont even do it anymore...either replace it or just live with it...
#6
Re: Review: 3M Headlight Restoration Kit
I used the Turtle Wax restoration kit. All I did was use the clarifying compound and it did a great job alone. They aren't where I want them yet, but I haven't felt like using the different restoring pads and putting in the elbow grease to clean em up. So far after a month and a half they look just like after I finished using the compound. I'd say it'll hold up very well, and its only like $8, a lot cheaper than the 3M.
#8
Re: Review: 3M Headlight Restoration Kit
The Turtle Wax kit uses a clarifying compound that you rub in and then wipe off, and then you hand 'sand' using 4 different grit pads and they also supply a small squirt bottle to use while using the pads. I'm gonna eventually use the pads and see how much better it gets my headlights. I had some friends use the 3M stuff with great success, but I wanted to see if the Turtle Wax was just as good for a lot less.
#9
Re: Review: 3M Headlight Restoration Kit
http://www.meguiarsonline.com/forums...ad.php?t=20994
Nice write up I found for some. Not sure if it works better for durability or not but write up is still detailed none the less.
Nice write up I found for some. Not sure if it works better for durability or not but write up is still detailed none the less.
#10
Re: Review: 3M Headlight Restoration Kit
Whether a fix like that holds up to time or not depends on what the problem actually was. If the problem is haze from scratches, the fix will last until the headlights get scratched enough to make them hazy again. If the problem is plastic oxidation (usually the plastic is too dry), the fix usually won't last because you're just adding chemicals back into the plastic. Given a little time, the chemicals will get removed it will look the same. It's kind of like using moisturizing lotion after washing your hands. The lotion works for a while or until you wash your hands again.
I'm assuming that because the car is so new, and it's a Honda (very good plastic chemistry) that you just had haze scratches and the polish job should last a long time. If you have a Neon or Cavalier or something (domestics often have horrible headlight plastic) then it may not last very long because the problem is usually oxidation or UV embrittlement. Usually the newer the car, the better the plastic technology too. Modern polymer chemistry is cool.
I'm assuming that because the car is so new, and it's a Honda (very good plastic chemistry) that you just had haze scratches and the polish job should last a long time. If you have a Neon or Cavalier or something (domestics often have horrible headlight plastic) then it may not last very long because the problem is usually oxidation or UV embrittlement. Usually the newer the car, the better the plastic technology too. Modern polymer chemistry is cool.
Last edited by Fabrik8; 07-18-2009 at 06:02 PM.