FS/FT: *90 Hatch* D16Z6-roll cage-disc brakes!
07-28-2007 | 07:24 PM
#1
Thread Starter
Registered Member
Joined: Jul 2006
Posts: 947
Likes: 0
FS/FT: *90 Hatch* D16Z6-roll cage-disc brakes!
GONE!!!
Name- Juice
Location- Winchester, VA
Contact- PM
Desciption- 1990 Civic Hatchback DX
$1300 OBO
D16Z6
OBD-1 Rywire harness
P28 ECU w/ stock Z6 base maps and 1 wire o2 sensor
CRX SI Tranny / liteweight flywheel - stage_?_clutch
Rear Disc Brakes, steel braided brake lines for all wheels
Energy Suspension sway bar front and back (might take these off)
Autopower 6PT rollcage
Lowering springs in front (brand name?) cut stock springs in rear
I bought this car a couple months ago for a project car cause the body is in pretty good shape. No major dents or rust. There is no rear interior and no driver side door panel. The guy said he messed up putting it in time and said it probably had bent valves. He was right, 2 bent valves. I work at a machine shop 15 bucks for 2 valves and made the head look brand spankin new (pressure tested/milled new surface) looks awesome. The guy said the bottem end had been rebuilt not too long ago, I believe him cause it looks like the cylinder walls were just honed. He also said it had a nice flywheel and stage 1or2 clutch, well I can see that it has a nice aftermarket flywheel, as for the clutch im not positive but he didnt lie about anything else so im sure it has a good clutch. So ive had the car for a long time and havnt done anything since i did the valve job. The head is sitting in my house and the car is sitting in my garage ready to be put together. I already have a CRX that I need to put together right now and I admit, I am a lazy bitch! So i really dont want to mess w/ this car right now.
TRADES OR BEST CASH OFFER. Dont lowball me like crazy, im not in need of money so im not going to take a stupid ass offer! I guess if time goes by and noone wants it, ill put it together LOL
(the rear sits alot lower than the front cause it had a DOHC ZC motor in the back)
Name- Juice
Location- Winchester, VA
Contact- PM
Desciption- 1990 Civic Hatchback DX
$1300 OBO
D16Z6
OBD-1 Rywire harness
P28 ECU w/ stock Z6 base maps and 1 wire o2 sensor
CRX SI Tranny / liteweight flywheel - stage_?_clutch
Rear Disc Brakes, steel braided brake lines for all wheels
Energy Suspension sway bar front and back (might take these off)
Autopower 6PT rollcage
Lowering springs in front (brand name?) cut stock springs in rear
I bought this car a couple months ago for a project car cause the body is in pretty good shape. No major dents or rust. There is no rear interior and no driver side door panel. The guy said he messed up putting it in time and said it probably had bent valves. He was right, 2 bent valves. I work at a machine shop 15 bucks for 2 valves and made the head look brand spankin new (pressure tested/milled new surface) looks awesome. The guy said the bottem end had been rebuilt not too long ago, I believe him cause it looks like the cylinder walls were just honed. He also said it had a nice flywheel and stage 1or2 clutch, well I can see that it has a nice aftermarket flywheel, as for the clutch im not positive but he didnt lie about anything else so im sure it has a good clutch. So ive had the car for a long time and havnt done anything since i did the valve job. The head is sitting in my house and the car is sitting in my garage ready to be put together. I already have a CRX that I need to put together right now and I admit, I am a lazy bitch! So i really dont want to mess w/ this car right now.
TRADES OR BEST CASH OFFER. Dont lowball me like crazy, im not in need of money so im not going to take a stupid ass offer! I guess if time goes by and noone wants it, ill put it together LOL
(the rear sits alot lower than the front cause it had a DOHC ZC motor in the back)
Last edited by 1PT-SICK; 08-20-2007 at 09:43 AM. Reason: price change :)
07-29-2007 | 08:48 AM
#2
Thread Starter
Registered Member
Joined: Jul 2006
Posts: 947
Likes: 0
Re: FS/FT: *90 Hatch* D16Z6-roll cage-disc brakes!
got a couple offers....can sell roll cage seperate.
07-29-2007 | 09:05 AM
#3
RPR
Joined: Oct 2004
Posts: 594
Likes: 0
Re: FS/FT: *90 Hatch* D16Z6-roll cage-disc brakes!
how much for roll bar cage and any pics?
07-29-2007 | 09:18 AM
#4
Thread Starter
Registered Member
Joined: Jul 2006
Posts: 947
Likes: 0
Re: FS/FT: *90 Hatch* D16Z6-roll cage-disc brakes!
I will take some pics soon. Here is a link of the exact same one only mine came black. *missing one piece, the piece that goes right beside passenger door. close to ther floor* would not be hard to make one, has a slight bend that any muffler shop could make.
http://autopowerindustries.com/Images/lg/DSC_2840.jpg
I just paid 580 for this shipped from Ohio so if i dont get close to that price i will keep it in the car.
http://autopowerindustries.com/Images/lg/DSC_2840.jpg
I just paid 580 for this shipped from Ohio so if i dont get close to that price i will keep it in the car.
Last edited by 1PT-SICK; 07-29-2007 at 09:19 AM. Reason: forgot to put the link :)
07-29-2007 | 05:50 PM
#5
Thread Starter
Registered Member
Joined: Jul 2006
Posts: 947
Likes: 0
Re: FS/FT: *90 Hatch* D16Z6-roll cage-disc brakes!
anymore offers anyone? this would be a badass little track car!
07-30-2007 | 09:35 AM
#6
Thread Starter
Registered Member
Joined: Jul 2006
Posts: 947
Likes: 0
Re: FS/FT: *90 Hatch* D16Z6-roll cage-disc brakes!
TTT
07-31-2007 | 04:40 AM
#7
Thread Starter
Registered Member
Joined: Jul 2006
Posts: 947
Likes: 0
Re: FS/FT: *90 Hatch* D16Z6-roll cage-disc brakes!
PM's replied...any other offers? swaps/cars/cash???
07-31-2007 | 02:19 PM
#8
Thread Starter
Registered Member
Joined: Jul 2006
Posts: 947
Likes: 0
Re: FS/FT: *90 Hatch* D16Z6-roll cage-disc brakes!
more PM's replied but no one serious enough to come pick it up
07-31-2007 | 02:56 PM
#9
Registered Member
Joined: Oct 2005
Posts: 795
Likes: 0
Re: FS/FT: *90 Hatch* D16Z6-roll cage-disc brakes!
Do you have anymore pics?