Problem w/ integra rear seat in a EG hatch
#1
Problem w/ integra rear seat in a EG hatch
Just wanted to know the best way to fit the bottom rear seat from a DC to EG hatch. Having problem with type r rear seat to lock the bottom part because it didnt match the holes.
#2
Re: Problem w/ integra rear seat in a EG hatch
You have to get the four door bottom piece.
You'll have a 2inch gap on both sides with the 2 door piece. Aswel as the tab for the 10mm bolt will be on the other side.
You can drill a hole in your car and run a self tapping screw in it. I just left it sitting there and it sits fine.
You'll have a 2inch gap on both sides with the 2 door piece. Aswel as the tab for the 10mm bolt will be on the other side.
You can drill a hole in your car and run a self tapping screw in it. I just left it sitting there and it sits fine.
#9
Re: Problem w/ integra rear seat in a EG hatch
I used the middle seatbelt to hold the bottom cushion down, check out the pics.
http://www.flickr.com/photos/9589810@N03/717874871/
http://www.flickr.com/photos/9589810@N03/717874871/
Thread
Thread Starter
Forum
Replies
Last Post
jdmitr757
Interior / Electrical / Car Stereo
0
02-15-2009 08:29 AM