CLEAN 2001 Integra GSR NHBP
#1
CLEAN 2001 Integra GSR NHBP
the car currently has a hydrolocked engine so its status is pending! ill know more next week
Name: Rob
Location: MD
Means of contact: 3014485230, r_berrydc2@yahoo.com for more pics
Price: $7500, ignoring lowballs.
Description: Alright, so i love my car but its time for something new. I purchased this from the original owner April of 2010 with 84xxx on it and now it has about 102xxx, oil changed every 3500 miles and all maintenance done by a Honda technician. Recently the radiator and gaskets were replaced and the engine is in great condition and still pulls hard.
MODS:
-Apexi WS2 exhaust, perfect sound.
-DC 4-1 header, a little dented from being lowered.
-New Raxles Axles replaced a couple months ago.
-New Spark plugs, wires, and cap 2 months ago.
-Injen Cold Air intake.
- Authentic Spoon front and rear strut bars.
-DC short shifter and blox knob.
-DC tie bar
-Tein Flex coilovers, handle great and go incredibly low.
-Skunk 2 uca's, bushings may need to be replaced soon.
-Aftermarket headlights with HIDs (wish they were oem but i haven't had the time to replace them).
- Type R front valance
-35% tint everywhere but the front windshield
-Flawless NHBP Type R wing can be included for an extra $180
-Will come on stripped Blades with decent tires.
-Interior is all black gsr leather, flawless! No rips in the seats or anything of the sort.
-The paint is in great condition for being 10 years old but it does have its normal signs of wear and careless door openers.
-Ive got some extra stuff ill include for free like extra turn signals and bulbs, some belts, and a few other things.
THE BAD
-The front bumper is aftermarket, it was replaced because of a dent. There is a crack in the aftermarket bumper so the passenger side turn signal doesn't stay in place that well. You're best bet is a new front bumper. The crack is small though, and on the very corner of the bumper.
before the blades
http://www.flickr.com/photos/robby_berry/5924699442/http://www.flickr.com/photos/robby_berry/5924699442/ by http://www.flickr.com/people/robby_berry/, on Flickr
http://www.flickr.com/photos/robby_berry/5857360618/http://www.flickr.com/photos/robby_berry/5857360618/ by http://www.flickr.com/people/robby_berry/, on Flickr
before the blades were stripped
http://www.flickr.com/photos/robby_berry/5512913880/http://www.flickr.com/photos/robby_berry/5512913880/ by http://www.flickr.com/people/robby_berry/, on Flickr
Name: Rob
Location: MD
Means of contact: 3014485230, r_berrydc2@yahoo.com for more pics
Price: $7500, ignoring lowballs.
Description: Alright, so i love my car but its time for something new. I purchased this from the original owner April of 2010 with 84xxx on it and now it has about 102xxx, oil changed every 3500 miles and all maintenance done by a Honda technician. Recently the radiator and gaskets were replaced and the engine is in great condition and still pulls hard.
MODS:
-Apexi WS2 exhaust, perfect sound.
-DC 4-1 header, a little dented from being lowered.
-New Raxles Axles replaced a couple months ago.
-New Spark plugs, wires, and cap 2 months ago.
-Injen Cold Air intake.
- Authentic Spoon front and rear strut bars.
-DC short shifter and blox knob.
-DC tie bar
-Tein Flex coilovers, handle great and go incredibly low.
-Skunk 2 uca's, bushings may need to be replaced soon.
-Aftermarket headlights with HIDs (wish they were oem but i haven't had the time to replace them).
- Type R front valance
-35% tint everywhere but the front windshield
-Flawless NHBP Type R wing can be included for an extra $180
-Will come on stripped Blades with decent tires.
-Interior is all black gsr leather, flawless! No rips in the seats or anything of the sort.
-The paint is in great condition for being 10 years old but it does have its normal signs of wear and careless door openers.
-Ive got some extra stuff ill include for free like extra turn signals and bulbs, some belts, and a few other things.
THE BAD
-The front bumper is aftermarket, it was replaced because of a dent. There is a crack in the aftermarket bumper so the passenger side turn signal doesn't stay in place that well. You're best bet is a new front bumper. The crack is small though, and on the very corner of the bumper.
before the blades
http://www.flickr.com/photos/robby_berry/5924699442/http://www.flickr.com/photos/robby_berry/5924699442/ by http://www.flickr.com/people/robby_berry/, on Flickr
http://www.flickr.com/photos/robby_berry/5857360618/http://www.flickr.com/photos/robby_berry/5857360618/ by http://www.flickr.com/people/robby_berry/, on Flickr
before the blades were stripped
http://www.flickr.com/photos/robby_berry/5512913880/http://www.flickr.com/photos/robby_berry/5512913880/ by http://www.flickr.com/people/robby_berry/, on Flickr
Last edited by rberrydc2; 12-03-2011 at 10:11 PM.