Honda D16Z6 problem??
#5
Re: Honda D16Z6 problem??
You can do a resistance check across the injectors as long and they are disconnected. This will only test the injectors though, nothing else. I dont know where to find the spec for them, im sure you can search honda tech and find it.
#6
ooooooooooowwweeeeee
Thread Starter
Join Date: Apr 2005
Location: Newport News VA
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
Re: Honda D16Z6 problem??
A Honda Tech guy told me to run the car and pull one at a time the fuel injector clip. The change or lack of change in idle should give me an answer.
#7
Re: Honda D16Z6 problem??
Ahhh, I must be slipping haha. Thats definately a good way to check. You have to wait a second though before anything will change. Usually it takes like 5 seconds for the lack of fuel to affect the idle. Try is out.
#9
ooooooooooowwweeeeee
Thread Starter
Join Date: Apr 2005
Location: Newport News VA
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
Re: Honda D16Z6 problem??
still same problem, anyone know what I should try next. From injector closest to the belts to furthest, pull the first plug off and idles rough plug it back in 2nd injextor unpluged idles rough 3rd injector idles rough and stalls out somtimes 4th injector furthest from the belts car dies???
anyone know??
anyone know??
#10
ooooooooooowwweeeeee
Thread Starter
Join Date: Apr 2005
Location: Newport News VA
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
Re: Honda D16Z6 problem??
Did a Ohm test, From injector closest to the belts to the furthest. 1st has .03 Ohms 2nd 76. Ohms 3rd 76. Ohms 4th 76. Ohms. I got 12 volts with ket on to each positive side of the plug. So im guessing its grounding out some where right??