Notices
Tech Talk Anything technically related to your vehicle should be posted here. If you're looking to have work done, try one of the Regional Forums.

car won't start

Thread Tools
 
Old 03-10-2006 | 02:42 PM
  #1  
Red81Z28's Avatar
Red81Z28
Thread Starter
BadAssMotherFuqr
 
Joined: Sep 2005
Posts: 231
Likes: 0
From: Newport News
Red81Z28 is on a distinguished road
Default car won't start

I put a jdm b16a in a 91 crx hf and it won't start. turns over and has fire. injectors are getting fuel but i don't know how well they are working. seems to be leaking a little water somewhere around the water pump area. Plugs seem to be wet when i pull em out but i can't smell gas. Maybe it's oil or antifreeze. Any suggestions? Also, i got the swap from someone on here that claims they bought the swap from hmotorsonline.
Old 03-10-2006 | 02:48 PM
  #2  
DOHC crx VTEC's Avatar
DOHC crx VTEC
Banned
 
Joined: Oct 2005
Posts: 3,258
Likes: 0
From: Virginia Beach, Virginia fucka
DOHC crx VTEC is an unknown quantity at this point
Default Re: car won't start

I have a B16a in my crx as well.....If you need help...pm me
Old 03-10-2006 | 02:58 PM
  #3  
Red81Z28's Avatar
Red81Z28
Thread Starter
BadAssMotherFuqr
 
Joined: Sep 2005
Posts: 231
Likes: 0
From: Newport News
Red81Z28 is on a distinguished road
Default Re: car won't start

starts with ether!?
Old 03-10-2006 | 03:31 PM
  #4  
DOHC crx VTEC's Avatar
DOHC crx VTEC
Banned
 
Joined: Oct 2005
Posts: 3,258
Likes: 0
From: Virginia Beach, Virginia fucka
DOHC crx VTEC is an unknown quantity at this point
Default Re: car won't start

If you need help.....I may be able to help you out.

729-1135

-Mike
Old 03-12-2006 | 02:47 PM
  #5  
Red81Z28's Avatar
Red81Z28
Thread Starter
BadAssMotherFuqr
 
Joined: Sep 2005
Posts: 231
Likes: 0
From: Newport News
Red81Z28 is on a distinguished road
Default Re: car won't start

sees to be head gasket cause there is water in the combustion chamber. anybody know how to take the crank pulley off?
Old 03-12-2006 | 03:32 PM
  #6  
j4k3's Avatar
j4k3
holla
 
Joined: May 2005
Posts: 8,179
Likes: 0
From: Va Beach
j4k3 j4k3 j4k3 j4k3 j4k3 j4k3 j4k3 j4k3 j4k3 j4k3 j4k3
Default Re: car won't start

Originally Posted by Red81Z28
sees to be head gasket cause there is water in the combustion chamber. anybody know how to take the crank pulley off?
your going to need to remove the big bolt in the center then use a gear remover and pry it off. im not positive if its on all hondas but there may be a small piece of metal (rectangular) that you'll have to keep an eye out for, it has to go in when you put it back together or it wont be put on right.
Old 03-14-2006 | 01:06 PM
  #7  
Red81Z28's Avatar
Red81Z28
Thread Starter
BadAssMotherFuqr
 
Joined: Sep 2005
Posts: 231
Likes: 0
From: Newport News
Red81Z28 is on a distinguished road
Default Re: car won't start

it took a couple minutes with the impact gun at 140 psi and spraying pb blaster on it.
Old 03-14-2006 | 06:37 PM
  #8  
hi boost 21 psi's Avatar
hi boost 21 psi
Registered Member
 
Joined: Oct 2005
Posts: 129
Likes: 0
hi boost 21 psi has disabled reputation
Default Re: car won't start

you can use a chain wrench to hold the pully still but you will need to get a old peice of belt to wrap around the pully so the chain doesnt mess it up. then use a breaker bar to get the nut loose... its kind of a pain in the ass but it works..
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
boognghts
Tech Talk
18
12-14-2007 10:05 AM
nickyroo
Tech Talk
3
09-02-2007 12:08 PM
HEISENBERG
757
9
06-07-2007 01:59 PM
Sickteg24
Tech Talk
9
02-21-2007 02:43 PM
twincamvega
Tech Talk
10
08-12-2004 12:21 PM



Quick Reply: car won't start



All times are GMT -8. The time now is 08:08 AM.