DSM Owners - O2 sensor testing?
#1
fun²
Thread Starter
Join Date: Dec 2002
Location: 38:58:09N 77:23:14W
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
DSM Owners - O2 sensor testing?
Anyone w/ a DSM know what the best way to test an O2 sensor is? Is it the normal plug it into a voltmeter and read it at idle to see if it stays steady?
any help would be much appreciated.
any help would be much appreciated.
#5
fun²
Thread Starter
Join Date: Dec 2002
Location: 38:58:09N 77:23:14W
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
yeah, thats what im trying to troubleshoot, is that the check light is on, car stubles like its misfiring between 2500-3500rpm ... i should probably check the readout from the test plug and at least narrow it down
#6
You sure you don't need a tune up?
If you get the code pulled it will help alot more then playing with a volt meter.
Thats one of the good things about obd systems. At least use the good to your advantage when you get a chance. Autozone will pull the code for you for free.
If you get the code pulled it will help alot more then playing with a volt meter.
Thats one of the good things about obd systems. At least use the good to your advantage when you get a chance. Autozone will pull the code for you for free.
Thread
Thread Starter
Forum
Replies
Last Post