2001 Acura GSR Part out- TONS OF AFTERMARKET. ALL MUST GO!
07-20-2015 | 08:02 PM
#1
Thread Starter
ONE WAY --->
Joined: Jul 2006
Posts: 539
Likes: 0
From: 804/540/571
2001 Acura GSR Part out- TONS OF AFTERMARKET. ALL MUST GO!
Name: Jesse
Location: West of Richmond, VA
Means of contact: 804-517-8710, please contact me by this number as I don't check this site often
Price: $ as listed below
Description:
EFI harness with GSR 'p72' ECU, original uncut all connectors are corrosion free: $150
Rear tail lights with LED lighting. No cracks, no scratches, no hazing, good seals and hardware: $60
Rear bumper with filler panel, no blemishes: $60
Both doors, including power mirrors, glass, and window motors, no interior panels. Passenger has scratch in lower left (see pic): $150
Both front fenders, original Acura units great fit. Both have small patches of clear coat peeling: $70
Rear hatch, includes heated glass, GSR spoiler, red Honda emblem, rear wiper delete, good struts, good seals. no blemishes: $135
Complete black leather interior seats front and rear, all trim pieces, door and hatch panels, hatch cover deck, Acura floor mats front and rear, complete center console, sunroof, dash, belts, all pillar panels, visors, EVERYTHING. Driver seat needs reupholster, dash has blown pass airbag and damaged vent. everything else is in very good condition and dark black with no fade: $455
Brake booster and master cyl, very low use genuine Honda replacement: $45
Clutch master cyl with reservoir, very low use basically new Nissin unit (mfg of Honda parts): $35
Location: West of Richmond, VA
Means of contact: 804-517-8710, please contact me by this number as I don't check this site often
Price: $ as listed below
Description:
EFI harness with GSR 'p72' ECU, original uncut all connectors are corrosion free: $150
Rear tail lights with LED lighting. No cracks, no scratches, no hazing, good seals and hardware: $60
Rear bumper with filler panel, no blemishes: $60
Both doors, including power mirrors, glass, and window motors, no interior panels. Passenger has scratch in lower left (see pic): $150
Both front fenders, original Acura units great fit. Both have small patches of clear coat peeling: $70
Rear hatch, includes heated glass, GSR spoiler, red Honda emblem, rear wiper delete, good struts, good seals. no blemishes: $135
Complete black leather interior seats front and rear, all trim pieces, door and hatch panels, hatch cover deck, Acura floor mats front and rear, complete center console, sunroof, dash, belts, all pillar panels, visors, EVERYTHING. Driver seat needs reupholster, dash has blown pass airbag and damaged vent. everything else is in very good condition and dark black with no fade: $455
Brake booster and master cyl, very low use genuine Honda replacement: $45
Clutch master cyl with reservoir, very low use basically new Nissin unit (mfg of Honda parts): $35
Last edited by 88SinZ; 03-19-2016 at 01:50 PM.
07-22-2015 | 07:41 AM
#4
Thread Starter
ONE WAY --->
Joined: Jul 2006
Posts: 539
Likes: 0
From: 804/540/571
07-22-2015 | 05:16 PM
#5
Thread Starter
ONE WAY --->
Joined: Jul 2006
Posts: 539
Likes: 0
From: 804/540/571
Re: 2001 Acura GSR Part out- TONS OF AFTERMARKET. ALL MUST GO!
prices updated
If you'd like to buy a few items at once, there may be a price break - let me know what all you're interested in for pricing
any non-listed from the vehicle send me a best offer, this is a COMPLETE PART OUT EVERYTHING GOES
If you'd like to buy a few items at once, there may be a price break - let me know what all you're interested in for pricing
any non-listed from the vehicle send me a best offer, this is a COMPLETE PART OUT EVERYTHING GOES
Last edited by 88SinZ; 07-22-2015 at 05:20 PM.
08-02-2015 | 06:18 PM
#7
Thread Starter
ONE WAY --->
Joined: Jul 2006
Posts: 539
Likes: 0
From: 804/540/571
Re: 2001 Acura GSR Part out- TONS OF AFTERMARKET. ALL MUST GO!
a few pics
Complete Intake and fuel setup $525 ready for shipping. This will include the following.
Skunk2 Throttle body
Skunk2 Intake manifold
InlinePro fuel rail
GSR injectors
AEM FPR
NRG oil dampened gauge
AN feed line
Phenolic manifold spacer
Throttle Cable custom brackets
All associated sensors attached to these components
Complete Intake and fuel setup $525 ready for shipping. This will include the following.
Skunk2 Throttle body
Skunk2 Intake manifold
InlinePro fuel rail
GSR injectors
AEM FPR
NRG oil dampened gauge
AN feed line
Phenolic manifold spacer
Throttle Cable custom brackets
All associated sensors attached to these components
Last edited by 88SinZ; 08-16-2015 at 08:36 AM.
