b18b head on b20 bottom end, better then b20 head?
#1
b18b head on b20 bottom end, better then b20 head?
herd that the b18 head on a b20 bottom would raise compression .1 and flow better, and that the cams are a little meanier. anybody know for sure. i assumed that the 2 heads might be identicle, but you never know. of course vtec will come later... justin, thanks
#2
Re: b18b head on b20 bottom end, better then b20 head?
pretty much. i forget what head it is, but there is a b20 with bseries vtec sized valves in it stock, that would be a good route to go.
#3
Re: b18b head on b20 bottom end, better then b20 head?
Im pretty sure the heads are actually identical.
#4
Re: b18b head on b20 bottom end, better then b20 head?
yes it is better becouse the b20 is made for a suv and the b18 head revs higher
becouse of the cams
becouse of the cams
#5
Re: b18b head on b20 bottom end, better then b20 head?
but you can also keep the b20 head on it and put the b18 cams in that head and it revs alot faster
ive tried it both ways on my b20 block
ive tried it both ways on my b20 block
#7
Re: b18b head on b20 bottom end, better then b20 head?
Originally Posted by bgddyal
yes it is better becouse the b20 is made for a suv and the b18 head revs higher
becouse of the cams
becouse of the cams
#8
Re: b18b head on b20 bottom end, better then b20 head?
basiclly what my point was
is that the cams are the only diff. the b18 cams rev higher
is that the cams are the only diff. the b18 cams rev higher
#9
Re: b18b head on b20 bottom end, better then b20 head?
Originally Posted by non-vtecpower
both heads say PR4 on them...
#10
Re: b18b head on b20 bottom end, better then b20 head?
Originally Posted by slowb20civic
my B20B head says PR8, the Pr8 has the bigger valves...lucky me