Check Engine Light After ITR IM Install
#1
Check Engine Light After ITR IM Install
Ok well I installed an ITR intake manifold w/ fuel rail and injectors about 3 days ago and have had no problems, runs great. But today, I was driving and noticed my check engine light was on and pulled over and checked what the code was, it was a code 45 (running too rich or lean) and I pretty much figure it's running rich because of the ITR injectors. My question is, will this lead to problems and should I just put the stock b16 injectors in? Thanks
-Jason
-Jason
#3
Re: Check Engine Light After ITR IM Install
Originally Posted by HybridBert
ITR injectors are the same size as 00 si injectors... both are 240cc. how's the idle, is it jumpy or is it steady?
#4
Racetracks
Join Date: Nov 2002
Location: How long is a piece of string?
Posts: 15,668
Likes: 0
Received 0 Likes
on
0 Posts
Re: Check Engine Light After ITR IM Install
Unplug your ECU (or pull the ECU fuse) for about half an hour to reset the ECU so it's XRAM is erased, then see how it goes. The ECU needs to relearn with your new bolt-ons..
#5
hybrid no more :(
Join Date: Apr 2003
Location: Virginia Beach
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
Re: Check Engine Light After ITR IM Install
Originally Posted by Fabrik8
Unplug your ECU (or pull the ECU fuse) for about half an hour to reset the ECU so it's XRAM is erased, then see how it goes. The ECU needs to relearn with your new bolt-ons..
#6
Re: Check Engine Light After ITR IM Install
ok just did that, unfortunetly after installing the old stock fuel rail and injectors pain in my ass...but yeah we'll see what happans in a half an hour
btw is there any difference between the 00 si and the ITR fuel rails?
Thanks
btw is there any difference between the 00 si and the ITR fuel rails?
Thanks
#7
hybrid no more :(
Join Date: Apr 2003
Location: Virginia Beach
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
Re: Check Engine Light After ITR IM Install
Originally Posted by Si Punk
btw is there any difference between the 00 si and the ITR fuel rails?
#8
Re: Check Engine Light After ITR IM Install
Originally Posted by HybridBert
no difference, all b series 92+ are same.
#9
Re: Check Engine Light After ITR IM Install
Originally Posted by Si Punk
Ok, straight, thanks a lot. I just plugged the ECU back in and the check engine light went off ran it for about 10 minutes and nothing. So, I think all is well. Thank you guys
Check Engine Light came back on, I reset the ECU just in case, but I have a feeling my car is running lean. It seems to kinda hesitate when I push on the gas and if I'm at higher RPMs it doesn't feel like it's going as fast as it should. Not sure what to do, any advice would be greatly appreciated, thanks.