Selling my amp... looking local
11-21-2003 | 10:24 AM
#1
Thread Starter
RAWR!%!#%!#
Joined: Sep 2003
Posts: 1,033
Likes: 0
From: Woodbridge, VA
Selling my amp... looking local
Well, I was really going to keep this amp to use if I ever get a system again, but my reckless driving ticket is going to be expensive, so I need the money. It's an Alpine MRP-M200. I'm looking for $100 firm, pickup at Radford or I'll deliver in Radford/Tech.
1 Channel Operation
Adjustable Crossover (LP)
Bass EQ Circuit
Bass Engine®
Both sides Terminal Layout
Continuously Adjustable Gain Control
Darlington Bi-Polar Outputs
Discrete Pre-Amp Stage
Gold Plated Insert Power Terminals
Gold Plated Power Screw Terminals
Gold Plated RCA Input Connectors
Gold Plated Speaker Screw Terminals
MOSFET Power Supply
MultiMode
No Current Limiting
Noise Elimination Coil
Phase Selector
STAR Circuitry
Solid Copper Bus Bars
Speaker Level Inputs
Subsonic Filter
Top Mounted LED Power Indicator
Tuned Bass EQ
Dividing Network : 50Hz-200Hz LP (18dB/oct)
Dividing Network : Variable 50Hz - 200Hz LP (18dB/oct)
Foot Print (WxHxD)in : 9” x 2-9/32” x 9”
Foot Print (WxHxD)mm : 250mm x 58mm x 230mm
Foot Sink (WxHxD) : 250mm x 58mm x 230mm
Frequency Reponse : 20Hz-200Hz (+0,-3dB)
Heat Sink (WxHxD) : 230mm x 58mm x 230mm
Heat Sink (WxHxD)in : 9” x 2-9/32” x 9”
Heat Sink (WxHxD)mm : 230mm x 58mm x 230mm
Input Impedance : 10k ohm
Input Sensitivity (for rated power) : 0.2 V to 4.0V
Input Sensitivity (for rated power) : 200mV ~ 4.0V
Power Requirements : 14.4V DC (11V to 16V)
Signal to Noise (S/N) : 100dBA (referenced to rated power)
Slew Factor : greater than 5
Speaker Impedance : 4 or 2 ohms (Mono)
Speaker Impedance : 4 or 2 ohms (stereo), 4 ohms (bridged)
Weight : 2.6kg(5lbs. 12oz.)
Weight : 2.8kg(6lbs. 3oz.)
MAX Power (at 14.4V,EIAJ)
Per channel into 2 ohms : 300W x 1
It's a great amp, powered 2 12 MTX subs, and people were amazed by how much power it really puts out. I'm willing to let you hook it up to your vehicle if you already have a system installed and see if you like it. email: benbenbc@yahoo.com or shoot me a PM. Thanks
1 Channel Operation
Adjustable Crossover (LP)
Bass EQ Circuit
Bass Engine®
Both sides Terminal Layout
Continuously Adjustable Gain Control
Darlington Bi-Polar Outputs
Discrete Pre-Amp Stage
Gold Plated Insert Power Terminals
Gold Plated Power Screw Terminals
Gold Plated RCA Input Connectors
Gold Plated Speaker Screw Terminals
MOSFET Power Supply
MultiMode
No Current Limiting
Noise Elimination Coil
Phase Selector
STAR Circuitry
Solid Copper Bus Bars
Speaker Level Inputs
Subsonic Filter
Top Mounted LED Power Indicator
Tuned Bass EQ
Dividing Network : 50Hz-200Hz LP (18dB/oct)
Dividing Network : Variable 50Hz - 200Hz LP (18dB/oct)
Foot Print (WxHxD)in : 9” x 2-9/32” x 9”
Foot Print (WxHxD)mm : 250mm x 58mm x 230mm
Foot Sink (WxHxD) : 250mm x 58mm x 230mm
Frequency Reponse : 20Hz-200Hz (+0,-3dB)
Heat Sink (WxHxD) : 230mm x 58mm x 230mm
Heat Sink (WxHxD)in : 9” x 2-9/32” x 9”
Heat Sink (WxHxD)mm : 230mm x 58mm x 230mm
Input Impedance : 10k ohm
Input Sensitivity (for rated power) : 0.2 V to 4.0V
Input Sensitivity (for rated power) : 200mV ~ 4.0V
Power Requirements : 14.4V DC (11V to 16V)
Signal to Noise (S/N) : 100dBA (referenced to rated power)
Slew Factor : greater than 5
Speaker Impedance : 4 or 2 ohms (Mono)
Speaker Impedance : 4 or 2 ohms (stereo), 4 ohms (bridged)
Weight : 2.6kg(5lbs. 12oz.)
Weight : 2.8kg(6lbs. 3oz.)
MAX Power (at 14.4V,EIAJ)
Per channel into 2 ohms : 300W x 1
It's a great amp, powered 2 12 MTX subs, and people were amazed by how much power it really puts out. I'm willing to let you hook it up to your vehicle if you already have a system installed and see if you like it. email: benbenbc@yahoo.com or shoot me a PM. Thanks
11-22-2003 | 03:12 PM
#2
Registered Member
Joined: Nov 2002
Posts: 1,520
Likes: 0
From: Fredericksburg/Blacksburg, VA
On a side note I have an Alpine MRV-F340 model an I can vouche that its a very quality piece. I dont know how similar this one is to mine, but mine puts out 50wx4 @4ohm and sounds clear as can be.
Thread
Thread Starter
Forum
Replies
Last Post