if the fuel salenoid doesnt have a vacuum source, will the car run like crap? this is on a 91' tsi.

 

there are alot of useless vaccum hoses on a dsm but i can't remember if that is one of them...crank the car and see.....it isn't going to hurt it

 

nothing noticeable will happen out of boost. you're putting things at risk if you try to boost with it off since you won't have the correct fuel pressure.

 

have no fear andrew here is the answer you seek.

http://www.dsmtuners.com/forums/show...vacuum+diagram

if you cant see that


1g Before and normal vacuum wiring:


1g After (I've got 2 different pics):

The WGS, EPS and TVV ports don't need to be plugged. However, plug the port of the evaporative canister hose on the turbo inlet hose after you remove the canister (not shown). The boost gauge may be ran off the "P" port of the throttle body or the FPS line.




and here is the archive


Youre welcome.

 

have no fear andrew here is the answer you seek.

http://www.dsmtuners.com/forums/show...vacuum+diagram

if you cant see that


1g Before and normal vacuum wiring:


1g After (I've got 2 different pics):

The WGS, EPS and TVV ports don't need to be plugged. However, plug the port of the evaporative canister hose on the turbo inlet hose after you remove the canister (not shown). The boost gauge may be ran off the "P" port of the throttle body or the FPS line.




and here is the archive
http://web.archive.org/web/200406211.../emissions.htm

Youre welcome.

 

do you have any of those diagrams for a 2g dsm?

 

yeah they used to be on TRE's website, but I can't seem to find it. There isnt as much taken off the 2g but still some are gone.... as for my engine bay, there are like 4 vacuum lines.

 

just go to dsm tuner and do a search for the word taboo.

THe site that had them was called taboospeedshop.som

 

TABOO duh... not TRE what was I thinking...