don't run stock oil pressure to turbo,run a restrictor
11-06-2005, 04:58 PM
#1
Banned
Thread Starter
Join Date: May 2005
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
don't run stock oil pressure to turbo,run a restrictor
I am just making sure everyone with turbines does not run a oil line straight from the block to turbine because its usually to much pressure and will blow seals.
i think you can get recommend oil pressure at idle and while revving ,on internet buy the manufacture.........usually between 5-30 psi ,so you need a valve with a pressue gauge to regulate. just tryin to help and know most peolple just run it to the block
i think you can get recommend oil pressure at idle and while revving ,on internet buy the manufacture.........usually between 5-30 psi ,so you need a valve with a pressue gauge to regulate. just tryin to help and know most peolple just run it to the block
11-24-2005, 02:34 PM
#2
git down on it
Join Date: Nov 2002
Posts: 1,943
Likes: 0
Received 0 Likes
on
0 Posts
Re: don't run stock oil pressure to turbo,run a restrictor
about 95 percent of turbo's nowadays have built in restrictors. everyone should be fine with running a -3 an line. research before you say something.
Thread
Thread Starter
Forum
Replies
Last Post
tundrafiend01
Cycle Corner
11
07-14-2007 05:15 AM
PoS hYbRiD
Automotive Discussion
16
08-26-2004 06:06 PM