amp problems?
#1
holla
Thread Starter
Join Date: May 2005
Location: Va Beach
Posts: 8,179
Likes: 0
Received 0 Likes
on
0 Posts
amp problems?
i was wiring up my amp and i grounded my wire then went to hook it up and i slipped and bumped the spot for my power wire and saw a spark... i've been told i might have blown the amp and i was just looking for some educated advice on if it could be blown or not??
#2
Registered Member
Join Date: Jun 2003
Location: Mississauga, Ontairo, Canada
Posts: 481
Likes: 0
Received 0 Likes
on
0 Posts
Re: amp problems?
Well i guess u could take the cover off, and see if it looks burned, or damaged, etc. Also try hooking it up and see if it works or not. I'm sure others could evaluate on my answeres but this is just my opinion.
#3
holla
Thread Starter
Join Date: May 2005
Location: Va Beach
Posts: 8,179
Likes: 0
Received 0 Likes
on
0 Posts
Re: amp problems?
i hooked it up and got no power, i took the cover off and saw some burnt looking places but my dad (who took like 5 years of applied electronics in college) says that its just bad sodering..i went to take the rest off and this nasty white paint looking stuff got everywhere so i stopped
#4
Racetracks
Join Date: Nov 2002
Location: How long is a piece of string?
Posts: 15,668
Likes: 0
Received 0 Likes
on
0 Posts
Re: amp problems?
If you were hooking up the ground wire, and you din't have a power wire connected to the amp, then you most likely didn't do anything bad to it. If there was no power to the amp, the spark you most likely saw was either you discharging static from your body into the vehicle ground, or you might have just grounded any residual charge that the internal capacitors in the amp still had stored. Either way, I don't think you probably hurt anything. Have you actually checked to see if the amp works or not?
I'm pretty sure that the white stuff you're talking about is lithium heat sink compound by the way, it's job is to help the big power transistors conduct heat to the heatsink/case. It does get everywhere, doesn't it.. Wash your hands after you touch that stuff, it's not that great for you.
I'm pretty sure that the white stuff you're talking about is lithium heat sink compound by the way, it's job is to help the big power transistors conduct heat to the heatsink/case. It does get everywhere, doesn't it.. Wash your hands after you touch that stuff, it's not that great for you.
#5
Banned
Join Date: Oct 2005
Location: Virginia Beach, Virginia fucka
Posts: 3,258
Likes: 0
Received 0 Likes
on
0 Posts
Re: amp problems?
well i have an amp problem too.......i have a pos American pro 600w amp......it stays in protect mode all the time......wtf is up? it was working fine and then i hooked it up to other speakers...was fine....then hooked mine back up..and it stayed in protect mode.....ive disconnected it..etc etc...idk what the hell is wrong with it?
#6
Re: amp problems?
Originally Posted by 88 Si Y8 Crix
well i have an amp problem too.......i have a pos American pro 600w amp......it stays in protect mode all the time......wtf is up? it was working fine and then i hooked it up to other speakers...was fine....then hooked mine back up..and it stayed in protect mode.....ive disconnected it..etc etc...idk what the hell is wrong with it?
Check for that and make sure your ground is good.
#7
holla
Thread Starter
Join Date: May 2005
Location: Va Beach
Posts: 8,179
Likes: 0
Received 0 Likes
on
0 Posts
Re: amp problems?
Originally Posted by Fabrik8
If you were hooking up the ground wire, and you din't have a power wire connected to the amp, then you most likely didn't do anything bad to it. If there was no power to the amp, the spark you most likely saw was either you discharging static from your body into the vehicle ground, or you might have just grounded any residual charge that the internal capacitors in the amp still had stored. Either way, I don't think you probably hurt anything. Have you actually checked to see if the amp works or not?
I'm pretty sure that the white stuff you're talking about is lithium heat sink compound by the way, it's job is to help the big power transistors conduct heat to the heatsink/case. It does get everywhere, doesn't it.. Wash your hands after you touch that stuff, it's not that great for you.
I'm pretty sure that the white stuff you're talking about is lithium heat sink compound by the way, it's job is to help the big power transistors conduct heat to the heatsink/case. It does get everywhere, doesn't it.. Wash your hands after you touch that stuff, it's not that great for you.
i hooked it all up right and got no power, im going to try it again when i have more time to mess with it. but i dont get it cuz it worked fine untill the ground bumped it
#10
Racetracks
Join Date: Nov 2002
Location: How long is a piece of string?
Posts: 15,668
Likes: 0
Received 0 Likes
on
0 Posts
Re: amp problems?
Actually fuses are pretty slow. If the amp is hooked up wrong, you can easily damage something before the fues blows, fuses are only there for overcurrent protection.