When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
say i did get an HF manifold, T25 turbo and the adapter flange...what else do i need...downpipe, BOV, fuel management, I/C(?), various gauges...what else??
blah junkyard turbo kits should only costt you 250 max, ill send you the link later after i get it from my friend, for the IC you use a 300zx stock side mount or or something else thats stock..all the piping they tell you to use ghetto hoses from home depot or something like that, i forgot about the rest
Originally posted by B18A1Integra You need a waste gate and tap ur engine for turbo
and may be some new pistons so ur pistons or engine block will crack.
what are u talking about!? ANYWAYS you'll need a new fuel pump, 1st gen eclipse bov, the wastegate is already on it so you just need to bend the piece back that actuates the wastegate so it will stay at around 6lbs. to 8lbs. of boost, also get t fittings to run oil lines from motor to turbo and turbo to oil pan(which has to be tapped for the line). then the best thing to do, a little bit more money, find a starion wrecked and get the intercooler off of it, then go get a muffler shop to do the piping with 2 1/4 or 2 1/2.then just bolt it all up, hopefully. u'll also need a few more little items that are kinda obvious like rubber fittings etc.
well i don't want it to be too ghetto...just functional for about 6psi...would i need to upgrade the fuel pump for 6lbs? or is that just to be on the safe side...see i know a lot about DSMs...but boosting the d16z6 is new to me...so lemmie know what i should do...i haven't been able to find any information on turbo setups using the hf manifold...yet