Honda Suspension
Thread Starter
LP LP --> LK HP
Joined: Aug 2003
Posts: 1,639
Likes: 0
From: Las Vegas
Honda Suspension
Does anyone know what size bolt threads through the engine bay of the EG or DC for the OEM ITR Strut Bar/ Mugen Strut Bar??? Its the two holes on both sides of the strut tower... Thanks
Last edited by BOOST FR3AK; Apr 10, 2006 at 08:31 AM.
Banned
Joined: Oct 2005
Posts: 3,258
Likes: 0
From: Virginia Beach, Virginia fucka
Re: Honda Suspension
Shit, I used to know it. I think its (12.5-something.) Call up bapgeon ask them to look in a "dorman" book for the bolt, they will be able to give you the Knurl, diameter, size all that jazz.
Thread Starter
LP LP --> LK HP
Joined: Aug 2003
Posts: 1,639
Likes: 0
From: Las Vegas
Re: Honda Suspension
Originally Posted by DOHC crx VTEC
Shit, I used to know it. I think its (12.5-something.) Call up bapgeon ask them to look in a "dorman" book for the bolt, they will be able to give you the Knurl, diameter, size all that jazz.
Bitches get Stitches
Joined: Mar 2003
Posts: 3,959
Likes: 0
From: Chesapeake
Re: Honda Suspension
yank the nut off of it, go to the hardware store and start checking to see what thread bolt the nut fits. i think hondas are always a 1.5 pitch with varying degrees of size.
Thread Starter
LP LP --> LK HP
Joined: Aug 2003
Posts: 1,639
Likes: 0
From: Las Vegas
Re: Honda Suspension
Originally Posted by sk8rmike
yank the nut off of it, go to the hardware store and start checking to see what thread bolt the nut fits. i think hondas are always a 1.5 pitch with varying degrees of size.
Registered Member
Joined: Feb 2006
Posts: 16
Likes: 0
From: Charlottesville
Re: Honda Suspension
Originally Posted by MUGEN FR3AK
There is no nut... Its just a hole in the engine bay where a stud usually is...
The nuts that go on them are listed as 10 x 1.25mm according to the Helms manual.
Thread Starter
LP LP --> LK HP
Joined: Aug 2003
Posts: 1,639
Likes: 0
From: Las Vegas
Re: Honda Suspension
Originally Posted by 95siguy
What are you trying to do? The "bolt" that usually comes through there is attached to the damper mounting base, part of the spring/shock assembly.
The nuts that go on them are listed as 10 x 1.25mm according to the Helms manual.
The nuts that go on them are listed as 10 x 1.25mm according to the Helms manual.