B18A1Integra

The engine I want is either a B18C1, b18c5,b16a2, or a h22a but my car is automatic or shall i say my dad's car is automatic and he wants to keep the tranny auto if possible. Also if you could find out who could do the labor and get the engine for about two thousand dollars.

Please leave name and Number For Contact,

Bert

all b-series motors will bolt up to any b-series tranny...the difference lies in the early models like the 89-91(?) bseries that have a small spline tranny...since it would be automatic...you would just have to transfer the torque converter stuff over to the new motor..you wouldn't need to get any new mount/bracket because any mount/bracket that you would need can be used from your old motor...HTH
bert

EEK

xsi motor, basically sir2 but obd-0 still 170 hp andd i believe cr = 10:4 direct drop in or you could just buy a b16 head and ls v

zappas

why keep it auto?

DrOpPeDRiCe

put an obd-1 b16 in it.

dohcEG

ive got a B17 swap. It comes in the 92-93 integra GSRs. it will bolt in to your 91. give me a pm if your interested.

B18A1Integra

Hey bert can u give some contacts that can do this for me and dohc eg may be u can helo me find out who can do this to.

B18A1Integra

Also do i need to buy a new tranny that is auto matic to keep the car auto?

MA-HALF-E

LS/VTEC and 5-speed.

dohcEG

im pretty sure that you can use the stock ls tranny with the B17.
I could probably do most of the work, but not while im still in school. i get out may 8th. let me know.