b16...wont start
#1
Registered User
Thread Starter
Join Date: Dec 2002
Location: va beach
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
b16...wont start
i went to start my swap and it tried to turn over and made a real loud pop sound...im guessing it was a piston trying to fire. i was told to just keep trying to start it but it keeps making the same pop sound and it wont start. and its not throwing a code either. so if anyone has any idea as to why its not starting that would be great. thanks
#6
hybrid no more :(
Join Date: Apr 2003
Location: Virginia Beach
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
check ignition first...make sure it is sparking...pull out the plugs and make sure they are firing...then make sure you didn't put the distributor on backwards...if this is ok..check fuel...check each injector to see if it fires....put a screwdriver to the injector, have somebody start it and put your ear to the screwdriver...if you hear a clicking then your injectors are good...if this is okay...check your compression...good luck...
#9
Registered User
Thread Starter
Join Date: Dec 2002
Location: va beach
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
thanks everyone, i got it started! the spark plug wires were in the wrong order..but now it wont go into gear...any gear. so i have to pull the trans and make sure the forks are lined up right.
but it is throwing a code, 5 so does anyone know what that is?
but it is throwing a code, 5 so does anyone know what that is?
Thread
Thread Starter
Forum
Replies
Last Post