boost problem
#1
Registered Member
Thread Starter
Join Date: May 2006
Location: va beach
Posts: 675
Likes: 0
Received 0 Likes
on
0 Posts
boost problem
ok i have a hatch with a ls boosted when the turbo full spools up it feels like the car hits a brike wall and wont take the air any know anything??
#6
Registered Member
Thread Starter
Join Date: May 2006
Location: va beach
Posts: 675
Likes: 0
Received 0 Likes
on
0 Posts
Re: boost problem
yea stock ecu with stock injectors running a fmu with a aem fuel rail and missing link....so should i upgrade my injectors to a 450 or 550??
#7
TurboPipingSystems
Join Date: Jul 2003
Location: USDM Land, Va Bch
Posts: 1,483
Likes: 0
Received 0 Likes
on
0 Posts
Re: boost problem
Are you using any kind of electronic boost controller? Fuel cut has nothing to do with your injectors. Fuel cut is the same as boost cut. If you are using an electronic boost controller (EBC) or a some kind of electronic fuel management that monitors boost, you could be hitting fuel/boost cut.
For instance, if your wastegate is set at 10 psi but you are spiking boost to 14 psi, your EBC or electronic fuel management will see that boost spike and control (cut-off) fuel to drive your motor slower. This is a safety function so you do not blow up your motor from overboosting.......
For instance, if your wastegate is set at 10 psi but you are spiking boost to 14 psi, your EBC or electronic fuel management will see that boost spike and control (cut-off) fuel to drive your motor slower. This is a safety function so you do not blow up your motor from overboosting.......