Problems...
#1
Registered Member
Thread Starter
Join Date: May 2004
Location: lake ridge / nova
Posts: 973
Likes: 0
Received 0 Likes
on
0 Posts
Problems...
03 r6 all of a sudden no power just going down the road in 6th gear and feels like it's in neutral. on the side of the road and i put it in gear (or what i thought was in gear...neutral light went out anyways) and i can just let go of the clutch and it sits idling like in neutral...what the deal! thinkin' clutch or tranny...any ideas?
#2
hatrs make me famous
Join Date: Feb 2006
Location: va beach/ 757
Posts: 3,761
Likes: 0
Received 0 Likes
on
0 Posts
Re: Problems...
um, did the chain break?
not trying to be a smartass, but i've seen it happen.
if not, it's probably in the clutch. if it feels like it still goes thru the gears, then the tranny is probably fine, although there's a possibility of a broken tranny shaft.
oh, one more thing to check, b/c i've seen it happen 6 or 7 times on r6's. the nut that holds the front sprocket on, check it, make sure it's on, and tight. i don't know what it is about that bike that makes the nut come loose and/or strip. if it's screwed, let me know. i happen to have a complete r6 tranny in my closet, including the sprocket nut an whatnot
not trying to be a smartass, but i've seen it happen.
if not, it's probably in the clutch. if it feels like it still goes thru the gears, then the tranny is probably fine, although there's a possibility of a broken tranny shaft.
oh, one more thing to check, b/c i've seen it happen 6 or 7 times on r6's. the nut that holds the front sprocket on, check it, make sure it's on, and tight. i don't know what it is about that bike that makes the nut come loose and/or strip. if it's screwed, let me know. i happen to have a complete r6 tranny in my closet, including the sprocket nut an whatnot
#3
Registered Member
Thread Starter
Join Date: May 2004
Location: lake ridge / nova
Posts: 973
Likes: 0
Received 0 Likes
on
0 Posts
Re: Problems...
um, did the chain break?
not trying to be a smartass, but i've seen it happen.
if not, it's probably in the clutch. if it feels like it still goes thru the gears, then the tranny is probably fine, although there's a possibility of a broken tranny shaft.
oh, one more thing to check, b/c i've seen it happen 6 or 7 times on r6's. the nut that holds the front sprocket on, check it, make sure it's on, and tight. i don't know what it is about that bike that makes the nut come loose and/or strip. if it's screwed, let me know. i happen to have a complete r6 tranny in my closet, including the sprocket nut an whatnot
not trying to be a smartass, but i've seen it happen.
if not, it's probably in the clutch. if it feels like it still goes thru the gears, then the tranny is probably fine, although there's a possibility of a broken tranny shaft.
oh, one more thing to check, b/c i've seen it happen 6 or 7 times on r6's. the nut that holds the front sprocket on, check it, make sure it's on, and tight. i don't know what it is about that bike that makes the nut come loose and/or strip. if it's screwed, let me know. i happen to have a complete r6 tranny in my closet, including the sprocket nut an whatnot
#4
Registered Member
Join Date: May 2003
Location: Richmond
Posts: 4,707
Likes: 0
Received 0 Likes
on
0 Posts
Re: Problems...
exact same thing happened to my friend's 03 R6, but haven't gotten a chance to take a look at it for him, if you find out lemme know might give me a head start
#5
hatrs make me famous
Join Date: Feb 2006
Location: va beach/ 757
Posts: 3,761
Likes: 0
Received 0 Likes
on
0 Posts
Re: Problems...
shavings??? that CAN'T be good. if the trans output shaft is chewed up, let me know, like i said, i have a whole r6 tranny sitting here, you're more than welcome to the parts if you need em. it's just sitting here collecting dust from a motor swap i did for a guy a while back.
BUT, if the shaft is screwed, the motor has to come out, and come apart to replace the shaft.
#6
Registered Member
Thread Starter
Join Date: May 2004
Location: lake ridge / nova
Posts: 973
Likes: 0
Received 0 Likes
on
0 Posts
Re: Problems...
shavings??? that CAN'T be good. if the trans output shaft is chewed up, let me know, like i said, i have a whole r6 tranny sitting here, you're more than welcome to the parts if you need em. it's just sitting here collecting dust from a motor swap i did for a guy a while back.
BUT, if the shaft is screwed, the motor has to come out, and come apart to replace the shaft.
BUT, if the shaft is screwed, the motor has to come out, and come apart to replace the shaft.
#8