Notices
Tech Talk Anything technically related to your vehicle should be posted here. If you're looking to have work done, try one of the Regional Forums.

help with 96 integra

Thread Tools
 
Old Mar 21, 2007 | 12:31 PM
  #1  
RiP_Fc3's Avatar
RiP_Fc3
Thread Starter
Registered Member
 
Joined: Jan 2003
Posts: 86
Likes: 0
From: 757 (NN-YC)
RiP_Fc3 is infamous around these partsRiP_Fc3 is infamous around these partsRiP_Fc3 is infamous around these partsRiP_Fc3 is infamous around these partsRiP_Fc3 is infamous around these partsRiP_Fc3 is infamous around these partsRiP_Fc3 is infamous around these partsRiP_Fc3 is infamous around these partsRiP_Fc3 is infamous around these partsRiP_Fc3 is infamous around these partsRiP_Fc3 is infamous around these parts
Default help with 96 integra

it seems when i give the car more than a half throttle it hesitates and slows accel rate until i hit like exactly 3k rpms,and starts pulling like i hit a switch or something, if i granny the throttle it accels fine
any input would be great i dont even know where to start, a sensor? injectors? fuel filter? Has anyone else had this problem with an obd-II integra?

oh yea the car doesent spit out any obdII codes or any warning lights, thanks for any input.
Old Mar 21, 2007 | 03:19 PM
  #2  
Function101's Avatar
Function101
Registered Member
 
Joined: Sep 2005
Posts: 45
Likes: 0
From: Northern Va
Function101 has disabled reputation
Default Re: help with 96 integra

Check your timing.
Old Mar 21, 2007 | 03:33 PM
  #3  
Boosted DC2's Avatar
Boosted DC2
Rock on you fucks!
 
Joined: Nov 2002
Posts: 161
Likes: 0
From: 757
Boosted DC2
Default Re: help with 96 integra

bad map sensor? check if you've got cracks on your distributor by spraying a mist of water onto it.
Old Mar 23, 2007 | 08:28 PM
  #4  
4drgsr's Avatar
4drgsr
BOOBS>EVERTHING!
 
Joined: Mar 2007
Posts: 1,592
Likes: 0
4drgsr 4drgsr
Default Re: help with 96 integra

whens the last time your fuel filter was changed??? check that too.....
Old Mar 24, 2007 | 07:13 AM
  #5  
RiP_Fc3's Avatar
RiP_Fc3
Thread Starter
Registered Member
 
Joined: Jan 2003
Posts: 86
Likes: 0
From: 757 (NN-YC)
RiP_Fc3 is infamous around these partsRiP_Fc3 is infamous around these partsRiP_Fc3 is infamous around these partsRiP_Fc3 is infamous around these partsRiP_Fc3 is infamous around these partsRiP_Fc3 is infamous around these partsRiP_Fc3 is infamous around these partsRiP_Fc3 is infamous around these partsRiP_Fc3 is infamous around these partsRiP_Fc3 is infamous around these partsRiP_Fc3 is infamous around these parts
Default Re: help with 96 integra

thanks for the input, checking all of em
Old Mar 24, 2007 | 08:27 AM
  #6  
black6gen's Avatar
black6gen
Turbo VTEC-E
 
Joined: Oct 2004
Posts: 1,520
Likes: 0
From: Memphis
black6gen can only hope to improve
Cool Re: help with 96 integra

Dont forget to check your 02 sensor.
Old Mar 25, 2007 | 11:23 AM
  #7  
CTR's Avatar
CTR
ACCOUNTANT
 
Joined: Sep 2005
Posts: 443
Likes: 0
From: Saigon, Vietnam
CTR has disabled reputation
Default Re: help with 96 integra

make sure you light even works first by putting the key into the ignition, turn to the 2nd notch without starting the car. the engine light should go on then turn off. if it doesnt come on then you know its burnt. it happened to me, i didnt even know i was throwing a code until i switched clusters.

well my first thought was that you are in limp mode. but you said you didnt throw any codes. but its worth a shot to reset the ecu. you can do so by disconnecting the negitive battery cable for 5-10mins.

have you checked your spark plugs and spark plug wires? once can be messed up causing you to run on only 3 cylinders which has those symptons. my friends car was doing the same thing, and i helped him do a tune up and all is well now. try doing a tune up if you havent done one recently. ie spark plugs, spark plug wires, distributor cap and rotor, fuel filter.

Last edited by CTR; Mar 25, 2007 at 11:30 AM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
AShotInTheDark9
Parts ARCHIVE
12
Nov 30, 2008 10:25 AM
ravenracer
Parts ARCHIVE
12
Dec 8, 2007 10:13 AM




All times are GMT -8. The time now is 10:25 AM.