Y is there an break line on the 95 but not an 94 integra?
#2
Boosted F2B
Join Date: Mar 2004
Location: coming back to VA..
Posts: 498
Likes: 0
Received 0 Likes
on
0 Posts
Re: Y is there an break line on the 95 but not an 94 integra?
huh? is your title a question? a break as in broken or break as in "i missed spelled it and it should be brake". either way, huh?
anyway, use an impact driver on the philips head screw. iicr it is a #3 bit.
anyway, use an impact driver on the philips head screw. iicr it is a #3 bit.
#3
corona connessuer
Join Date: Nov 2002
Location: GUAM
Posts: 3,425
Likes: 0
Received 0 Likes
on
0 Posts
#4
Registered Member
Thread Starter
Join Date: Jul 2005
Location: Chesapeake
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
Re: Y is there an break line on the 95 but not an 94 integra?
Alright there are 2 break lines for the 94 integra. One for the e-brake and one I guess for actually braking. But on the 95 there is an extra one that goes underneath the rotor. Y is that. Im asking b/c I have to replace the whole driverside rear suspension b/c both bolts were stripped off by previous owner.
So if I take of the 3 bolts and the impact screws that are behind the rotors it should just pop off or what?
Mark
So if I take of the 3 bolts and the impact screws that are behind the rotors it should just pop off or what?
Mark
#5
corona connessuer
Join Date: Nov 2002
Location: GUAM
Posts: 3,425
Likes: 0
Received 0 Likes
on
0 Posts
Re: Y is there an break line on the 95 but not an 94 integra?
Alright there are 2 break lines for the 94 integra. One for the e-brake and one I guess for actually braking. But on the 95 there is an extra one that goes underneath the rotor. Y is that. Im asking b/c I have to replace the whole driverside rear suspension b/c both bolts were stripped off by previous owner.
So if I take of the 3 bolts and the impact screws that are behind the rotors it should just pop off or what?
Mark
So if I take of the 3 bolts and the impact screws that are behind the rotors it should just pop off or what?
Mark
#6
Registered Member
Thread Starter
Join Date: Jul 2005
Location: Chesapeake
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
Re: Y is there an break line on the 95 but not an 94 integra?
Can I just take off the brake and rotor and put it on the subframe? Is that possible if so how do I do it?
#8
Re: Y is there an break line on the 95 but not an 94 integra?
Alright there are 2 break lines for the 94 integra. One for the e-brake and one I guess for actually braking. But on the 95 there is an extra one that goes underneath the rotor. Y is that. Im asking b/c I have to replace the whole driverside rear suspension b/c both bolts were stripped off by previous owner.
So if I take of the 3 bolts and the impact screws that are behind the rotors it should just pop off or what?
Mark
So if I take of the 3 bolts and the impact screws that are behind the rotors it should just pop off or what?
Mark
Are these the same?
#10