i want to know if all this will work for my mpfi swap

ok i got a injector resistor box off of a 91 prelude
99-00 y8 intake manifold with tb fuel rail and injectors
pm6 ecu(i know thats correct to use)
still need a dizzy does it matter what obd?
i think thats everything i need for the mpfi swap if i need n e thing else someone please let me know


i am doing this conversion it my obd0 hatch

 

You need an OBD0 Si dizzy. They also have different connectors (circular vs. rectangular) I used a 1990 Accord resistor box so I doubt the Prelude's would be any different. Should be good to go. Just wire up the box, ECU, and distributor. Also the stock intake needs slight modification due to the larger area occupation of the throttle body and manifold.

HERE IS A VERY HELPFUL LINK:

http://www.angelfire.com/d20/hcivic88/dx-siwiring.html

 

you might have to redo the iacv if its a auto mani

 

if hes using y8 injectors he does not need the resistor box does he?

 

if i dont need the resistor box then how would i wire it up

 

u need a resistor box....

 

if your using y8 injectors you DONT need the resistor box.

 

help, need the experts in here

 

as long as your sure you have y8 injectors you do not need the resistor box