12 grade bolts
May 23, 2007 | 08:45 AM
Thread Starter
Joined: Nov 2002
Posts: 369
Likes: 0
From: NOVA
12 grade bolts
anyone know where i can 12 grade or stronger bolts from in the area or online. i went to fishers in springfield and all they had was stainless steel. I don't think that will hold up my type R sway bar to my LCAs.
May 23, 2007 | 10:04 AM
Joined: Nov 2002
Posts: 765
Likes: 0
From: Newport News
Re: 12 grade bolts
you should be using a metric bolt so 8.8 should be fine.
May 23, 2007 | 10:07 AM
Joined: Nov 2002
Posts: 765
Likes: 0
From: Newport News
Re: 12 grade bolts
my bad 10.9 in metric. also try fastenal.
May 23, 2007 | 10:15 AM
Thread Starter
Joined: Nov 2002
Posts: 369
Likes: 0
From: NOVA
Re: 12 grade bolts
ok. Yeah do you know anywhere that sells a bolt like that?
May 23, 2007 | 10:30 AM
Joined: Feb 2006
Posts: 4,129
Likes: 0
From: 22427
Re: 12 grade bolts
get me exact length and ill see what i have here in my store. i sell shit loads of metric bolts.
May 23, 2007 | 10:43 AM
Thread Starter
Joined: Nov 2002
Posts: 369
Likes: 0
From: NOVA
Re: 12 grade bolts
I measured 3 inches.
May 23, 2007 | 11:33 AM
Joined: Feb 2006
Posts: 4,129
Likes: 0
From: 22427
Re: 12 grade bolts
alright i have class 8.8 metric hardened bolts. 3 inches is equivalent to 70mm. what diameter is the bolt and what pitch [thread] do you need?
May 23, 2007 | 11:38 AM
Thread Starter
Joined: Nov 2002
Posts: 369
Likes: 0
From: NOVA
Re: 12 grade bolts
hmm umm the pitch doesn't matter if you can pervide a nut to go with it. The diameter..hmm ill have to figure that out.
May 23, 2007 | 11:52 AM
Joined: Feb 2006
Posts: 4,129
Likes: 0
From: 22427
Re: 12 grade bolts
nuts no problem, find out if its 10mm, 12mm or so on.
May 23, 2007 | 11:58 AM
Thread Starter
Joined: Nov 2002
Posts: 369
Likes: 0
From: NOVA
Re: 12 grade bolts
well the radius is half a mm. I forget how to get the diameter.
12 grade bolts
