FS: SOHC TURBO KIT $1200 obo
Thread Starter
HASSELHOFF!
Joined: Feb 2003
Posts: 1,095
Likes: 0
FS: SOHC TURBO KIT $800 OBO!
Im Located in virginia beach and you can reach me by pms or by my cell phone anytime.757-714-5214
Im selling my it because ive pretty much lost all interest in hondas. so my loss is your gain.
Kit consists of:
HF manifold
BMC mitsu adapter plate
14B turbo fairly decent condition. minimal shaftplay.
2 1/2 inch downpipe with factory dump routed into the exhaust, already has flex pipe.
i bought a bunch of piping in 2 inch and 2 1/4 from racing solutions which consists of one of each size:
U bends
90 degree bends
45 degree bends
and 2 feet of each size straight.
(should be enough to make piping for just about anything.)
another 90 degree bend with the super sequential knock off already attached to it.
alot of different size couplers both silicone and home depot style.
15 tbolt clamps.
spearco intercooler i believe the dimensions are 27x7x2
oil line and brass fittings for turbo and back of block.
turbo xs knock off manual boost controller
2 glowshift gauges (boost, and oil pressure).
$800 bucks!
and thats pretty much it i think, basically everything you need to boost your single cam. ive never had a chance to use this setup but the last person made 167 on 8 lbs on fmu so this could be a pretty powerful setup if tuned correctly.
anyways the price is obo so let me know whats up. i will have pics up by tomorrow.
thanks
dan
757-714-5214
anytime
Im selling my it because ive pretty much lost all interest in hondas. so my loss is your gain.
Kit consists of:
HF manifold
BMC mitsu adapter plate
14B turbo fairly decent condition. minimal shaftplay.
2 1/2 inch downpipe with factory dump routed into the exhaust, already has flex pipe.
i bought a bunch of piping in 2 inch and 2 1/4 from racing solutions which consists of one of each size:
U bends
90 degree bends
45 degree bends
and 2 feet of each size straight.
(should be enough to make piping for just about anything.)
another 90 degree bend with the super sequential knock off already attached to it.
alot of different size couplers both silicone and home depot style.
15 tbolt clamps.
spearco intercooler i believe the dimensions are 27x7x2
oil line and brass fittings for turbo and back of block.
turbo xs knock off manual boost controller
2 glowshift gauges (boost, and oil pressure).
$800 bucks!
and thats pretty much it i think, basically everything you need to boost your single cam. ive never had a chance to use this setup but the last person made 167 on 8 lbs on fmu so this could be a pretty powerful setup if tuned correctly.
anyways the price is obo so let me know whats up. i will have pics up by tomorrow.
thanks
dan
757-714-5214
anytime
Last edited by yllalnad; Jul 13, 2007 at 03:45 AM. Reason: phone numbers werent matching
٩███۶ wilrep 4 a leg
Joined: Jan 2006
Posts: 2,808
Likes: 0
Re: FS: SOHC TURBO KIT $1200 obo
hey thats my old turbo kit lol, (made 167whp on 6psi) 
same mani, oil lines, fittings, turbo - also its a ported 7cm housing, custom downpipe, BOV and pipe
hope this helps with the sell
same mani, oil lines, fittings, turbo - also its a ported 7cm housing, custom downpipe, BOV and pipe
hope this helps with the sell