Valve adjustment
#1
Registered Member
Thread Starter
Join Date: Aug 2006
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
Valve adjustment
hey guys, wondering how hard is it? dealer wants like $420 to do mine... might try to do it on my own or something. anyone know how hard it is? or anyone who can lend a hand =) thanks
#2
Registered Member
Join Date: Aug 2006
Location: Dallas, TX
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
Re: Valve adjustment
You might get more responses if you list the make, model, and year of the bike. You could also try searching on google for a how-to. I'm sure there's a forum somewhere more closely related to your bike than vadriven. If all else fails, get a clymer's manual for your bike.
FTD.
FTD.
#3
Registered Member
Thread Starter
Join Date: Aug 2006
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
Re: Valve adjustment
ya my bad forgot about that. its a 03 kawasaki ninja 636 with 14xxx miles. its making this ticking noise from the top, guessing its the valves needing adjusting.
#4
Registered Member
Join Date: May 2004
Location: lake ridge / nova
Posts: 973
Likes: 0
Received 0 Likes
on
0 Posts
Re: Valve adjustment
not sure where you're located but i know a guy (tom) at powerhouse in midland, va who does em for $150 and that's a damn bargain. i was gonna do my own this year but said screw it when it was that cheap
#5
hatrs make me famous
Join Date: Feb 2006
Location: va beach/ 757
Posts: 3,761
Likes: 0
Received 0 Likes
on
0 Posts
Re: Valve adjustment
636's always tick. it's in the cam chain tensioner. i wouldn't worry about that too much. but if it's due for a valve service, then have at it.
as far as the valve adjust goes, it's not really hard, but it is time consuming, and if you don't get the timing dead nuts when you put it all back together, you might kiss your motor goodbye. not trying to scare you off doing it yourself, but make SURE it goes back together right, or you'll have hard parts hitting hard parts in the motor. shim/bucket valve setups like your 636 has are more difficult to do (compared to something with threaded adjusters), and if anything is out of adjustment, you're going to need a selection of shims to get it all back in spec.
#6
Registered Member
Thread Starter
Join Date: Aug 2006
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
Re: Valve adjustment
got a number i can call? i was thinking of doing it myself, but might let him do it for me. as for the 636 always ticking, i THINK its the valves. the book says 15,000 miles have the valves checked, im at 14 now, so i guess i should have them check and adjusted if needed.
#8
hatrs make me famous
Join Date: Feb 2006
Location: va beach/ 757
Posts: 3,761
Likes: 0
Received 0 Likes
on
0 Posts
Re: Valve adjustment
agreed, you're due for a valve servive anyway, but don't be surprised if it still ticks a bit even after the adjustment.
#9
Registered Member
Thread Starter
Join Date: Aug 2006
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
Re: Valve adjustment
sorry, forgot to ask, was that just labor or labor+parts? guessing just labor though.