pulling glass?
#1
pulling glass?
got a 96 hatch need to pull the quarter and rear hatch glass...
need someone to come to the house or give advice taking it off..
how much would this usually run?
any help is appreciated
need someone to come to the house or give advice taking it off..
how much would this usually run?
any help is appreciated
#3
Re: pulling glass?
i suggest getting a pro do it, but most places might not only pull your glass
but if your bound and determined to do it yourself, you will need to buy a "cold knife"(blade w/ handle and cable) to get behind glass and cut through the urethane..
you will also need a razor knife(long blade will help) to cut some sections that cold knife wont reach..
i think you can purchase these at autozone,advance,places like that.
and there is proper steps to reinstall the glass, thats another reason i suggest calling the pros
but if your bound and determined to do it yourself, you will need to buy a "cold knife"(blade w/ handle and cable) to get behind glass and cut through the urethane..
you will also need a razor knife(long blade will help) to cut some sections that cold knife wont reach..
i think you can purchase these at autozone,advance,places like that.
and there is proper steps to reinstall the glass, thats another reason i suggest calling the pros
#5
Re: pulling glass?
i dont suggest doing this, this method was used yrs ago because of what they call "tape kits" its a butyl(sticky, glue like substance put over foam)
thats why piano string cuts through easily..
however urethane will be much harder to cut through, so make it easier on yourself and either buy the tools or get a pro
Last edited by frk_concepts; 10-09-2007 at 05:15 PM.
Thread
Thread Starter
Forum
Replies
Last Post
crystalized
Other ARCHIVE
9
10-08-2007 10:07 AM