98 GSR bottom end
#1
Registered Member
Thread Starter
Join Date: Apr 2007
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
98 GSR bottom end and built head
*i have a 98 gsr bottom end....comes with everything except water neck and tensioner....around 60k miles....everything was good when the head was pulled off. $450
* 95 gsr p72 head just had a valve job, resurfaced head, cleaned and pressure checked, mild port and polish job. has new valves, crower titanium retainers, crower dual valve springs, and valve guides, complete head minus T/B, cams, distributer. Head is still wraped up in plastic wrap from the machine shop....can give pics upon request....$1100
* 95 gsr p72 head just had a valve job, resurfaced head, cleaned and pressure checked, mild port and polish job. has new valves, crower titanium retainers, crower dual valve springs, and valve guides, complete head minus T/B, cams, distributer. Head is still wraped up in plastic wrap from the machine shop....can give pics upon request....$1100
Last edited by typeswerx; 11-24-2007 at 04:46 PM.
#2
Registered Member
Thread Starter
Join Date: Apr 2007
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
Re: 98 GSR bottom end
bump
#3
Registered Member
Thread Starter
Join Date: Apr 2007
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
Re: 98 GSR bottom end
^^^
#5
soon to boost!!
Join Date: Jul 2007
Location: Richmond
Posts: 1,724
Likes: 0
Received 0 Likes
on
0 Posts
Re: 98 GSR bottom end
if you still got the block, ill get it from you this weekend.
Thread
Thread Starter
Forum
Replies
Last Post