Does anyone mind if i came by your place....shop...what have you and test fit your 0 offset wheels, gotta be 5x100, its for a experiment to see if it will work on srt-4's, take measurements and what not. Im doing this for the SRTForums community. If you dont mind please let me know. i just want to test fit 2 on one side thats it and take pics for the Forums.

thanks
Miguel

 

Google in "offset calculator". And you do realize that the width of the wheel makes a difference as well?

 

very true, 7-8" wide, i know some good camber will be needed as well but like i said i just wanna test fit some so the SRT-4 community can visually see the fitment and i can give them my two cents. car has been out for 4+ years and no one on the boards has done it. people have put 0 offset on theyre first gens just fine, just had to have some more camber.

 

I've seen 8" wheels on SRT-4's with +4X (either that or high 30s) offset and it's flush with the fender.

Good luck.

 

yeah i know this is an experiment for the site because nobody has ever ran 0 offset b4. 35-48mm is the proper offset for SRT-4's.

 

Has nobody on the SRT4 forum realized that zero offset means nothing without a width measurement?

 

ill give you one tomarrow maybe ya'll can help, what measurement do you need.

 

He said 7-8". That's what my comment was based on.

 

0 offset doesn't necessarily mean your wheels will be flush. I doubt you'll easily find someone with 0 offset wheels in 5x100. Like I said, google in "offset calculator".

 

Of course. It's going to depend on width and what car it's on. I only threw my comment out there because it was relevant to what I've see "flush" on an SRT-4.