non - consistant idle - need help
#1
Registered User
Thread Starter
Join Date: Dec 2004
Location: central Va
Posts: 382
Likes: 0
Received 0 Likes
on
0 Posts
![spoonej1 has disabled reputation](images/reputation/reputation_off.gif)
![Default](images/icons/icon1.gif)
My vehicle in the morning and when it first starts up idle's fine, after you warm it up or after initial start the idle jumps from about 800-1500 rpm's constantly unless you give it a little gas and stay there with the trottle, this happens when it's just sitting in the parking lot, or when you take it out of gear and just coasting to a stop. What do you think it is? Car is a 93 honda Civic Vtec mini me with a y8 intake mani. Thanks
#3
Registered User
Thread Starter
Join Date: Dec 2004
Location: central Va
Posts: 382
Likes: 0
Received 0 Likes
on
0 Posts
![spoonej1 has disabled reputation](images/reputation/reputation_off.gif)
![Default](images/icons/icon1.gif)
Is the IACV under the throttle body or attached to the rear of the manifold? I can't remember and always get those two confused
. Thanks for the help
![Big Grin](images/smilies/biggrin.gif)
#4
Registered member
Join Date: Jan 2007
Location: Gloucester
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
![nce has disabled reputation](images/reputation/reputation_off.gif)
![Default](images/icons/icon1.gif)
The fast idle thermal valve is the one under the tb ,Iacv is on the back of the mani. Sounds like its probaly the fitv . If you look inside the tb there is 2 ports on the left side . one goes to the iac the other to the fitv . check and make sure that when the motor is warm that there is no vaccum on the bottom one, if there is its the fitv. block it with your finger. if it idles right then thats your problem. most times they just need cleaned
#5
Ramey Built
Join Date: Nov 2005
Location: Portsmouth
Posts: 507
Likes: 0
Received 0 Likes
on
0 Posts
![JB@RameyBuilt](images/reputation/reputation_pos.gif)
![JB@RameyBuilt](images/reputation/reputation_pos.gif)
![JB@RameyBuilt](images/reputation/reputation_pos.gif)
![JB@RameyBuilt](images/reputation/reputation_pos.gif)
![JB@RameyBuilt](images/reputation/reputation_pos.gif)
![JB@RameyBuilt](images/reputation/reputation_highpos.gif)
![JB@RameyBuilt](images/reputation/reputation_highpos.gif)
![JB@RameyBuilt](images/reputation/reputation_highpos.gif)
![JB@RameyBuilt](images/reputation/reputation_highpos.gif)
![JB@RameyBuilt](images/reputation/reputation_highpos.gif)
![JB@RameyBuilt](images/reputation/reputation_highpos.gif)
![Default](images/icons/icon1.gif)
The fast idle thermal valve is the one under the tb ,Iacv is on the back of the mani. Sounds like its probaly the fitv . If you look inside the tb there is 2 ports on the left side . one goes to the iac the other to the fitv . check and make sure that when the motor is warm that there is no vaccum on the bottom one, if there is its the fitv. block it with your finger. if it idles right then thats your problem. most times they just need cleaned
Thread
Thread Starter
Forum
Replies
Last Post