got questions about my gsr
#1
Registered Member
Thread Starter
Join Date: Apr 2008
Location: richmond
Posts: 262
Likes: 0
Received 0 Likes
on
0 Posts
got questions about my gsr
i bought a gsr that is suppose to have je pistons and skunk2 stage 2 turbo cams.
What is it that i can do to verify that these are what they are suppose to be?
What is it that i can do to verify that these are what they are suppose to be?
Last edited by bugg_08; 06-16-2008 at 07:26 PM. Reason: added info
#6
DESTROYS DONUTS !!
Join Date: Nov 2002
Location: the seed has sprouted.
Posts: 13,275
Likes: 0
Received 0 Likes
on
0 Posts
Re: got questions about my gsr
the cams should have a part number on the distrubutor side, call skunk 2. get the part numer from the, take off the valve cover and remove the cam cap, you should be able to see it.
#7
Registered Member
Thread Starter
Join Date: Apr 2008
Location: richmond
Posts: 262
Likes: 0
Received 0 Likes
on
0 Posts
#10
Re: got questions about my gsr
compression test will tell you if the compression is lower across all four cyl just make sure that the compression is even with all 4 cyl you could use a bore-a-scope witch will allow you to look down in the cyl through the spark plug hole and some aftermarket pistons have the part num on the top of the piston and you can read it off of it and call and check other than that you will have to take it apart and find out