want to do h22 swap in a DA help
#1
Registered Member
Thread Starter
Join Date: May 2008
Location: nova
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
want to do h22 swap in a DA help
has any one on here did an h22 swap in an da waht do i need besides motor and trany and motor mount kit and can i keep my ys1 trans or is the prelude one better
#2
NOt rep'n the g1teg
Join Date: Sep 2007
Location: York County/Richmond
Posts: 585
Likes: 0
Received 0 Likes
on
0 Posts
Re: want to do h22 swap in a DA help
i would keep the ys1 tranny because h22 trannies are cable linkage..and to convert from rod to cable would be hell in my opinion..
do the better option.. swap a k
...www.hasport.com
do the better option.. swap a k
...www.hasport.com
#4
Go Hard or Go Home
Join Date: May 2006
Location: Suffolk
Posts: 832
Likes: 0
Received 0 Likes
on
0 Posts
Re: want to do h22 swap in a DA help
im doing a swap at the moment that is almost identical to yours JDM F22b in an EF..... try explicitspeedperformance.net they dont have the h2b adapter you would need to use your ys1 tranny but they can probably point you in the right direction.
#5
Go Hard or Go Home
Join Date: May 2006
Location: Suffolk
Posts: 832
Likes: 0
Received 0 Likes
on
0 Posts
Re: want to do h22 swap in a DA help
#6
Registered Member
Thread Starter
Join Date: May 2008
Location: nova
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
Re: want to do h22 swap in a DA help
thanks the mounts are $400 also why you doing an f swap insead of an h just wondering and what are the specs on an f22
#7
Go Hard or Go Home
Join Date: May 2006
Location: Suffolk
Posts: 832
Likes: 0
Received 0 Likes
on
0 Posts
Re: want to do h22 swap in a DA help
specs:
Displacement (cc): 2156
Power (bhp@rpm): 166 @ 6,000 rpm
Torque (ft/lbs@rpm): 156 @ 5,000 rpm
Compression Ratio: 9.2:1
Bore (mm): 85
Stroke (mm): 95
Cam Design: DOHC
tranny: USDM H23A1
....in short its a non vtec dohc 2.2 liter F-series.... the only dohc F- series as far as i know. it was available in the 92-96 JDM prelude. with a bit of boost, this should prove to be a torque monster
#8
Registered Member
Thread Starter
Join Date: May 2008
Location: nova
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
Re: want to do h22 swap in a DA help
hey thats an good reason and has decent hp and torque pretty soon ill start my swap any idea on how the h22 is on boost
#9
Go Hard or Go Home
Join Date: May 2006
Location: Suffolk
Posts: 832
Likes: 0
Received 0 Likes
on
0 Posts
Re: want to do h22 swap in a DA help
i believe its fine on boost.... im not exactly sure of the compression so i dont know how safe it would be. if you planned on building your motor then i would say go ahead and boost... but on stock internals i dunno. i would pull the pistons in favor of something lower; around 9.1:1. i would probably get some jdm type s pistons and spray it. http://www.zealautowerks.com has a compression calculator for b,h and k series motors.... enter in your info and it will let you know if you're on the right track.
yeah man... when i saw the numbers on the F22B i was sold right there. a few more horses than a b16 and about 40 more ft/lbs of torque... and all for less than a b16 longblock... cant go wrong. GL with your swap
yeah man... when i saw the numbers on the F22B i was sold right there. a few more horses than a b16 and about 40 more ft/lbs of torque... and all for less than a b16 longblock... cant go wrong. GL with your swap
Last edited by phreakvbhc; 06-26-2008 at 08:05 PM.
#10
Registered Member
Thread Starter
Join Date: May 2008
Location: nova
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
Re: want to do h22 swap in a DA help
yea man good deal and good thinking the first day i bought my car i beat an b16 i have an ls with ys1 tans new clutch it pull but i rarely see DA's with an h22a or an ef with an f22