98 spec gsr trans for sale,non lsd.
Up for grabs is my minty gsr tranny ONLY. It does not grind in any gears at all except maybe reverse at times,typical though.
Good-it is mint and does not grind any gear at any rpm.
Bad- could use a new casing,one of the rear t bracket bolt holes broke half way,and the 3 front torque mount holes are stripped. The rear could easily have a thread tap put into place and welded for secure purposes,but its holding up fine the way it is on my motor.
So basically it runs off of 2 bolts on the rear t bracket although it still drives fine and i rigged a longer bolt in the snapped hole in the rear.
If you are interested you may test drive before i pull it.
Im asking 350 VERY reasonable to an extent because it is SOOOO mint.
I will put a ls casing on the tranny for an additional 100 dolllasss.
Good-it is mint and does not grind any gear at any rpm.
Bad- could use a new casing,one of the rear t bracket bolt holes broke half way,and the 3 front torque mount holes are stripped. The rear could easily have a thread tap put into place and welded for secure purposes,but its holding up fine the way it is on my motor.
So basically it runs off of 2 bolts on the rear t bracket although it still drives fine and i rigged a longer bolt in the snapped hole in the rear.
If you are interested you may test drive before i pull it.
Im asking 350 VERY reasonable to an extent because it is SOOOO mint.
I will put a ls casing on the tranny for an additional 100 dolllasss.
Last edited by madsteez; Aug 9, 2008 at 01:09 PM.
Thread
Thread Starter
Forum
Replies
Last Post
ricin4ever
Engine / Exhaust / Drivetrain
14
Mar 11, 2009 08:59 AM





