Boosted 89 CRX Si 4700obo
#1
Boosted 89 CRX Si 4700obo
CAR HAS ALL PARTS ON IT, JUST NEEDS TO BE PUT TOGETHER!!!
This is my friend davids car, he doesnt have a pc so call or text him at (434)-221-8117
Engine: (he cleaned it with a tooth brush!!!
-B18A1 (all gaskets and seals are new except head gasket)
-Canon 5qt. oil pan (gold)
-SLS mini ram horn manifold
-Garrett T3 T04E Turbo 57trim 63 A/R
-Goautoworks IC piping 2.5 hot and cold
-Intercooler
-Tial wastegate 38mm
-HKS BOU SSQ
-ACT street lite flywheel, ACT heavy duty pressure plat, ACT 6 puck unsprung cluch
-Hasport mounts and linkage
-3" kfeller exhaust, stainless
-C&R aluminum radiator
Tranmission:
-Stock LS Tranny
-DSS 2.9 Axles rated to 450 hp
Suspension:
-91 DA rear brake conversion with energy Suspension trailing aim bushings
-91 DA front brakes (not installed)
-traction bar
Body:
-carbon fiber zc hood
-4pt roll cage. bolt in and SCCA approved
-Energy suspension steering rack bushings (not installed)
-short throw shifter
This car had been a project for over 2 years now and I need to sell because of money issues. I have 2 90degree 3" elbows and a 2ft piece of 3" stainless and a peice of 3" flex. All parts are new and have never been run. I have a steering wheel and a quick release that I will let go with it and two Tenzo R bucket seats. They need to be recovered. The engine is in there now cause to dump tube and dp need to be mocked up. I have an obd1 distributor on the engine now so the only thing someone needs are RC 550 injectors and an ECU to get it running. I was goin to pull the wastegate spring and fire it up on stock injectors whenever that was going to happen. The body is in good shape, just primered. (new rear bumper, black) I have over 6000 in the car and I want to get 4700 obo
NO PARTING OUT GIVE ME SOME TRADE IDEAS (OPEN TO A 4X4 OR A JEEP)
This is my friend davids car, he doesnt have a pc so call or text him at (434)-221-8117
This is my friend davids car, he doesnt have a pc so call or text him at (434)-221-8117
Engine: (he cleaned it with a tooth brush!!!
-B18A1 (all gaskets and seals are new except head gasket)
-Canon 5qt. oil pan (gold)
-SLS mini ram horn manifold
-Garrett T3 T04E Turbo 57trim 63 A/R
-Goautoworks IC piping 2.5 hot and cold
-Intercooler
-Tial wastegate 38mm
-HKS BOU SSQ
-ACT street lite flywheel, ACT heavy duty pressure plat, ACT 6 puck unsprung cluch
-Hasport mounts and linkage
-3" kfeller exhaust, stainless
-C&R aluminum radiator
Tranmission:
-Stock LS Tranny
-DSS 2.9 Axles rated to 450 hp
Suspension:
-91 DA rear brake conversion with energy Suspension trailing aim bushings
-91 DA front brakes (not installed)
-traction bar
Body:
-carbon fiber zc hood
-4pt roll cage. bolt in and SCCA approved
-Energy suspension steering rack bushings (not installed)
-short throw shifter
This car had been a project for over 2 years now and I need to sell because of money issues. I have 2 90degree 3" elbows and a 2ft piece of 3" stainless and a peice of 3" flex. All parts are new and have never been run. I have a steering wheel and a quick release that I will let go with it and two Tenzo R bucket seats. They need to be recovered. The engine is in there now cause to dump tube and dp need to be mocked up. I have an obd1 distributor on the engine now so the only thing someone needs are RC 550 injectors and an ECU to get it running. I was goin to pull the wastegate spring and fire it up on stock injectors whenever that was going to happen. The body is in good shape, just primered. (new rear bumper, black) I have over 6000 in the car and I want to get 4700 obo
NO PARTING OUT GIVE ME SOME TRADE IDEAS (OPEN TO A 4X4 OR A JEEP)
This is my friend davids car, he doesnt have a pc so call or text him at (434)-221-8117
Last edited by Da_Lancer; 09-11-2008 at 05:27 PM.
Thread
Thread Starter
Forum
Replies
Last Post
brinkleyjones
Want to Buy / Trade ARCHIVE
0
10-15-2008 07:09 PM