i just have a real quick question for the em1 guys. i would like to know how wide the rear sway bar is. end link to end link if its no trouble. thanks.

 

i dont think they come with one stock...i could be wrong but i dont think so...

 

all 99-00 si came with a rear sway bar. but i dont want to crawl under someone elses car while they are filling up for fuel or anything. lol.

 

they do come with one stock im thinking its 13mm. ill check its length tomorrow at work when i have a tape on me and post it if someone hasnt already. what do you want to know for?

 

its 13mm i looked it up

 

i would like to know the length because i put a dc one on mine and its really tight. i had to force the bolts into the lcas and i didnt like the way it is. i talked to a mechanic that works mainly on hondas and he said that the sway bars are the same and i was like i dont think so because when i took off the dc's sway bar, i didnt have to force anything. so that is way i would like to know the width. i knew that the bar was 13mm but im not looking for the thickness of it. but thanks guys.

 

he is right, dc ones are the same. they will also fit eg i believe. yours was probably a little tight due to it being aftermarket. shouldnt hurt anything, i mean it wasnt so tight you werent able to put it in properly. all the rear sway bars i have seen aftermarket are the same thing as oem, just painted or coated.

 

mine isnt aftermarket. i dont need thickness. i need length. end link to end link. can you measure yours for me and then get back with me. thanks.

 

yea, i totally forgot earlier. i just went and checked it and this is what i got. right now im replacing my front subframe so my car is up in the front about two feet. the rear tires arent sitting really any lower than usual though. for the front and rears of an em1 the sway bar is attached to end links on either side that attach it to the control arms. from the center of one bolt that attaches the endlink to the control arm to the other is about 41.75". i measured over from the center of that bolt to the face of the end of the actual sway bar and its to the inside of the car about 1". making the overall length of the sway bar from face to face, (with weight and an stech with gr2 drop), about 39.75. hope that helps.

 

They are all the same. The only difference between any of them is the diameter. they come in 13mm, 22mm, and 23mm. Other than that, there are no differences in length.