Adrenaline Autoworks and Driskill's Performance now ONE!
Thread Starter
1-877-TURBOKT
Joined: Nov 2004
Posts: 1,064
Likes: 0
From: 712 Albany Ave, Richmond,VA
Adrenaline Autoworks and Driskill's Performance now ONE!
Hey Central, just letting everybody know, that Adrenaline and Driskill's Performance are now one shop. Dan is moving in with us!
The dyno is up and running, got it set up last week. It's a loadbased dyno so from now on no more road tuning, we can hold any rpm increments steadily, for perfect tuning. It's AWD, so for all the Subaru's and Evo's, we are here to help.
Dyno Rates:
$80-baseline pull(3 pulls w/ A/F)
$175/HR- Tuning(min. 2hrs)
Anything additional is going to be a $100/HR Charge.
Matt Shue is going to be tuning most of the Honda platforms(Kpro, Hondata S300, Chrome, Neptune, for all other applications please call.
Trey Spinner is going to be tuning the AWD platforms right now, as of now he's using OpenECU on the Subaru's and Evo's. We should be getting Cobb soon. For all other platforms please call.
The mandrel bender is also here, as of today Dan is up in Wisconsin getting trained on the tooling, He will be back Tuesday. So hopefully we will have the tooling by the end of this week. The bender is able to do 2.5" and 3" piping(stainless, mild steel and aluminum) So for any intercooler piping custom exhausts, we've got you covered.
We should have pictures up soon on the website of everything.
The dyno is up and running, got it set up last week. It's a loadbased dyno so from now on no more road tuning, we can hold any rpm increments steadily, for perfect tuning. It's AWD, so for all the Subaru's and Evo's, we are here to help.
Dyno Rates:
$80-baseline pull(3 pulls w/ A/F)
$175/HR- Tuning(min. 2hrs)
Anything additional is going to be a $100/HR Charge.
Matt Shue is going to be tuning most of the Honda platforms(Kpro, Hondata S300, Chrome, Neptune, for all other applications please call.
Trey Spinner is going to be tuning the AWD platforms right now, as of now he's using OpenECU on the Subaru's and Evo's. We should be getting Cobb soon. For all other platforms please call.
The mandrel bender is also here, as of today Dan is up in Wisconsin getting trained on the tooling, He will be back Tuesday. So hopefully we will have the tooling by the end of this week. The bender is able to do 2.5" and 3" piping(stainless, mild steel and aluminum) So for any intercooler piping custom exhausts, we've got you covered.
We should have pictures up soon on the website of everything.
Last edited by AdrenalineAuto; Sep 29, 2008 at 04:20 PM.
Thread Starter
1-877-TURBOKT
Joined: Nov 2004
Posts: 1,064
Likes: 0
From: 712 Albany Ave, Richmond,VA
Re: Adrenaline Autoworks and Driskill's Performance now ONE!
Thread Starter
1-877-TURBOKT
Joined: Nov 2004
Posts: 1,064
Likes: 0
From: 712 Albany Ave, Richmond,VA
Re: Adrenaline Autoworks and Driskill's Performance now ONE!
Thank you, we're working very hard everyday to make it happen.
Yep Matt, came over last week, and played around on it. It's a great dyno, the numbers it gives are unbelievably accurate unlike any mustang or dynojet dyno.
Everybody is more than welcome to come check it out, if you would like more info visit www.land-and-sea.com/
It's the AWD 12" twin-roller dyno. And if you would like to see more info on the mandrel bender visit www.bii1.com/ and take a look at the MB-350, it has a video of it in work, it's an amazing machine.
We also have the bender for roll cages, and custom strut bars, bike frames, racing chassis. It's the RDB-150, with this machine we have tooling for 1",1.125", 1.5", 1.75". Here's the direct link to it.
Yep Matt, came over last week, and played around on it. It's a great dyno, the numbers it gives are unbelievably accurate unlike any mustang or dynojet dyno.
Everybody is more than welcome to come check it out, if you would like more info visit www.land-and-sea.com/
It's the AWD 12" twin-roller dyno. And if you would like to see more info on the mandrel bender visit www.bii1.com/ and take a look at the MB-350, it has a video of it in work, it's an amazing machine.
We also have the bender for roll cages, and custom strut bars, bike frames, racing chassis. It's the RDB-150, with this machine we have tooling for 1",1.125", 1.5", 1.75". Here's the direct link to it.
Y U NO REP ME ?!?
Joined: May 2005
Posts: 3,753
Likes: 0
From: 8 0 4
Re: Adrenaline Autoworks and Driskill's Performance now ONE!
thats pretty cool Pip. Im not gonna lie i had my doubts but it seems like yall are doin good. Heard the new commerical too on the radio over the weekend. Hope the sucky economy doesnt hold yall back.
