The other day i started my bike and right after the initial start up my FI light flashes 3 times or so and cuts off. I was wondering if this is normal. I thought it only meant something if it stayed on solid. I just want to make sure. I dont know any help i would greatly appreciate it.

 

if it's not staying on i wouldn't worry about it too much, but if you really want to see whats going on, take it to a shop and have the codes read, if there are any.

 

that means it you have a fault code and count it and makes sure.

0 - bank angle sensor, ECM, PGM-FI fuse
1 - MAP sensor
2 - MAP sensor vacuum hoses, or sensor itself
7 - ECT sensor poorly connected or open circuit
8 - TP sensor, TP senspr wiring
9 - IAT sensor connection, or open wire
10 - Baro sensor, or connection, or wiring
11 - Vehicle speed sensor, or connection or wiring
12 - #1 injector connection, or faulty injector
13 - #2 injectior connection or faulty injector
14 - #1 connection or open/shorted circuit
15 - #2 connection or open/shorted circuit
18 - Cam pulse sensor, connection or loose sensor
19 - Ignition pulse sensor, connection or loose sensor
20 - faulty E-PROM in ECM

 

Thanks im gonna try to check it out today.

 

Well i went to check it out today and i was wrong it doesnt flash it just stays like for not even a second and cuts off. I guess its just part of the bike starting up like in your car when some of your lights in your cluster come on and go off.

 

yeah, that's normal. I have an 03 cbr600rr... nothing unusual

 

Thanks just wanted to be sure i appreciate it.