jaydmdc2

hey i just put a rear disc conversion on my 89 crx si from a da and went to get an alignment and when there where setting the toe in the back the toe is pushed out as far as it will go and it is still slightly toed in.my question is are you suppose to use the crx or da toe arm things i think there called compensater arms. anyway's the arm that connects the trailing arm to the chassis where you set the toe do i use the stock crx one or the da one that came with my rear disc because the arm needs to be about couple inches longer. i don't have my stock crx arm anymore can i use one from any ef with drums in the back. any help would be appreciated.

Jarrod

The arms should be same on all 'ef's of 88-91 but do not quote me on that.

When my friend Tim had his CRX he had DA rear trailing arms and his car had a VW poke going on. It looked kinda good once we got the alignment and all that set.

Good luck.