Teg; Fully built,boosted,jdm front,high HP
#1
Registered Member
Thread Starter
Join Date: May 2008
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
**NewPics** Teg; Fully built,boosted,jdm front,high HP
Alright...back up again just to see what we get. As before,im in NO RUSH to get rid of my car. I love this thing (esp after putting on the sticky ickies). The offers and trades i was offered before were good ones,but none to make me give up my baby. so heres another round (though in this f-ed up ecomony the offers might be worse! lol) lets get down to the nitty gritty:
Car is a 1994 integra LS with 150,xxx on body (but near every susp. bushing has been re-done). NO RUST even before paint,and the car has been shaved on just about everything. Painted Phoenix Yellow (PY56 i believe the code is) just about a year and a half ago. Car makes 501whp on low boost and pump gas and a veeerrrrryyy rich tune(about to change when i re-tune before summer),and made damn near 7 on high boost w/c16 (though i did barrow my tuners "fuel set-up",but nothing else) ill give exact numbers when you strike heavy interest in the car. lets get down to the list.....
This is going strictly off the top of my head....i know for a fact i cant remember everything on the car.
MOTOR:
DOHC VTEC valvecover (lol that was a joke)
GSR head
Skunk2 pro 1 cams
Skunk2 pro cam gears
Skunk2 valvesprings/retainers
Skunk2 intake manifold
Ferra Stainless Steel valves (1mm over intake and stock size exhaust)
B18B LS block
AEBS Sleeves bored to 84mm
Cometic HG
84mm Wiseco pistons
SCAT connectiong rods
ACL race bearings
Moroso oil pan
LS trans
ACT Xtreme pressureplate
6 puck sprung disc
Poly Urathane race mount inserts
**probably forgetting some things,but you get the idea**
Turbo Kit:
SynapseTurbo Ramhorn manifold
BorgWarner/Bullseye turbo s362ett
3" downpipe to 3" exhaust
Precision 750hp intercooler
Greddy type S BOV
M&W ignition
880cc injectors
Hondata s300 w/boost controller
Vibrant couplings/t-bolt clamps
**again,forgetting stuff but you get the idea**
CAR:
JDM front end w/black housing headlights
Painted PY
Everything shaved
16" Work 3 piece RS-BETA ewing wheels
245/50/16 Nitto 555r drag radials (just put on)
Carbon Fiber hood
Carbon fiber type r wing
Omni power (sport) full coilovers
Blox LCA's
Red "Recaro style" front seats
automete phantom boost/oil press/coolant temp gauges
gsr leather rear seats
**again i know for a fact im forgetting things on these lists...but you get the idea**
Thats what i can remember off the top of my head....and its late (well to me it is,haha),but you do get the idea. Car turns heads EVERYWHERE i go.
Now heres what im looking for:
Price is $17,000obo
Trades: Id CONSIDER trading for these items....again....consider...
A pretty new full size truck, a new or like new 1000cc sportbike with some cash.supra,nsx (or similar sports cars) a 2 bike combo,a truck and a bike,nice bmw,benz......basically let me know what you have.
Again in no hurry to get rid of my car
Car is a 1994 integra LS with 150,xxx on body (but near every susp. bushing has been re-done). NO RUST even before paint,and the car has been shaved on just about everything. Painted Phoenix Yellow (PY56 i believe the code is) just about a year and a half ago. Car makes 501whp on low boost and pump gas and a veeerrrrryyy rich tune(about to change when i re-tune before summer),and made damn near 7 on high boost w/c16 (though i did barrow my tuners "fuel set-up",but nothing else) ill give exact numbers when you strike heavy interest in the car. lets get down to the list.....
This is going strictly off the top of my head....i know for a fact i cant remember everything on the car.
MOTOR:
DOHC VTEC valvecover (lol that was a joke)
GSR head
Skunk2 pro 1 cams
Skunk2 pro cam gears
Skunk2 valvesprings/retainers
Skunk2 intake manifold
Ferra Stainless Steel valves (1mm over intake and stock size exhaust)
B18B LS block
AEBS Sleeves bored to 84mm
Cometic HG
84mm Wiseco pistons
SCAT connectiong rods
ACL race bearings
Moroso oil pan
LS trans
ACT Xtreme pressureplate
6 puck sprung disc
Poly Urathane race mount inserts
**probably forgetting some things,but you get the idea**
Turbo Kit:
SynapseTurbo Ramhorn manifold
BorgWarner/Bullseye turbo s362ett
3" downpipe to 3" exhaust
Precision 750hp intercooler
Greddy type S BOV
M&W ignition
880cc injectors
Hondata s300 w/boost controller
Vibrant couplings/t-bolt clamps
**again,forgetting stuff but you get the idea**
CAR:
JDM front end w/black housing headlights
Painted PY
Everything shaved
16" Work 3 piece RS-BETA ewing wheels
245/50/16 Nitto 555r drag radials (just put on)
Carbon Fiber hood
Carbon fiber type r wing
Omni power (sport) full coilovers
Blox LCA's
Red "Recaro style" front seats
automete phantom boost/oil press/coolant temp gauges
gsr leather rear seats
**again i know for a fact im forgetting things on these lists...but you get the idea**
Thats what i can remember off the top of my head....and its late (well to me it is,haha),but you do get the idea. Car turns heads EVERYWHERE i go.
Now heres what im looking for:
Price is $17,000obo
Trades: Id CONSIDER trading for these items....again....consider...
A pretty new full size truck, a new or like new 1000cc sportbike with some cash.supra,nsx (or similar sports cars) a 2 bike combo,a truck and a bike,nice bmw,benz......basically let me know what you have.
Again in no hurry to get rid of my car
Last edited by peakaboost; 04-25-2009 at 04:59 PM.
#5
Re: Teg; Fully built,boosted,jdm front,high HP
Nice setup! Does it still have the stock fuel rail like in the older pictures or did you get all that replaced now? Either way, bump for you!
#7
Registered Member
Thread Starter
Join Date: May 2008
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
#10
Registered Member
Thread Starter
Join Date: May 2008
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts