B18c5 Block with a slightly spun rod bearing.
Thread Starter
Boost is Better
Joined: Oct 2004
Posts: 2,456
Likes: 0
From: Richmond area
B18c5 Block with a slightly spun rod bearing.
Name: Brandon
Location: Blacksburg va
Means of contact: Pm
I think when the motor was rebuilt it wasn't done correctly. This motor only has roughly 25k or less since the rebuild but it started to knock. I pulled the motor apart already and don't see any damage to the crank OR the rod with the naked eye. The bearing was only slightly messed up and out of shape.
I stopped running the car as SOON as I heard the knock and it was a very slight knock.
It is a B18C5 block with wiseco 12 to 1 comp pistons with stock R rods. ARP bolts
Asking 400 obo
Trades: Need a new B series block Preferably something Vtec
Location: Blacksburg va
Means of contact: Pm
I think when the motor was rebuilt it wasn't done correctly. This motor only has roughly 25k or less since the rebuild but it started to knock. I pulled the motor apart already and don't see any damage to the crank OR the rod with the naked eye. The bearing was only slightly messed up and out of shape.
I stopped running the car as SOON as I heard the knock and it was a very slight knock.
It is a B18C5 block with wiseco 12 to 1 comp pistons with stock R rods. ARP bolts
Asking 400 obo
Trades: Need a new B series block Preferably something Vtec
Thread
Thread Starter
Forum
Replies
Last Post
s14 tunr
Import - ASIA
21
Nov 18, 2008 03:39 PM