What Wheel Spacer size (trying to go flush)
#1
![Default](images/icons/icon1.gif)
I am trying to flush my "new" set of wheels on my celica. I have a list of measurements I just took and I am unsure if I did this right or not. I am also trying to figure out what tires I need but figure I will wait till I have spacers in to test out how the fitment will be. Then I will figure out what tire to wrap it with.
I have seen a celica running 19x8 +35 on the front and 19x9.5 +35 on the back with a fender roll and slight pull and it fit.
For celicas it seems the money size is 17x8 +35 for flush.
So here is my measurement list:
Currently I have 17x7 +40 with 225/45 R17 tires (all 4 wheels)
I have 1 inch spacing between the inside of my current tire and my strut housing.
I am trying to mount 17x8.5 +56 on the front and 17x9.5 +56 on the rear. From my measuring it seemed almost like I needed close to a 2inch spacer in the rear but that would definitely be alot lower than a +35. I figured I needed a 1 inch spacer in the front.
Anyone able to help me solve this issue. Anyone in NOVA have 5x100 to 5x120 or 5x4.5 adapters we could throw on and see how it flushes up? I'll buy you dinner or beer (if over 21).
I have seen a celica running 19x8 +35 on the front and 19x9.5 +35 on the back with a fender roll and slight pull and it fit.
For celicas it seems the money size is 17x8 +35 for flush.
So here is my measurement list:
Currently I have 17x7 +40 with 225/45 R17 tires (all 4 wheels)
I have 1 inch spacing between the inside of my current tire and my strut housing.
I am trying to mount 17x8.5 +56 on the front and 17x9.5 +56 on the rear. From my measuring it seemed almost like I needed close to a 2inch spacer in the rear but that would definitely be alot lower than a +35. I figured I needed a 1 inch spacer in the front.
Anyone able to help me solve this issue. Anyone in NOVA have 5x100 to 5x120 or 5x4.5 adapters we could throw on and see how it flushes up? I'll buy you dinner or beer (if over 21).
Last edited by Harold_Fastwake; 07-14-2009 at 05:12 PM.
#2
![Default](images/icons/icon1.gif)
the lower the offset number the closer the wheel will be to your fender. +56 is similar to a steelie and 0 is what most sportmaxes are.
#3
![Default](images/icons/icon1.gif)
The biggest problem is most of the celica people are dumb as shit, stick to sucked in wheels and are 16 years old.
![Roll Eyes (Sarcastic)](images/smilies/rolleyes.gif)
#4
![Default](images/icons/icon1.gif)
If my calculations are correct, you're going to want a 15mm spacer up front, and 20mm spacer out back to put you right about where the 19x8 +35 and 19x9.5 +35 wheels were at.
#5
![Default](images/icons/icon1.gif)
I am wondering about going with a slightly larger spacer than the 19x9.5 guy and pull my fender to adjust for the poke.
#6
![Default](images/icons/icon1.gif)
Or, this is what jus_dubin would do: dump the fuck out of the car, space the fuck out of the wheels, and then make the body work around that. You can never fail with that method.
#7
![Default](images/icons/icon1.gif)
But yes, I am considering just going wider with spacers, then do the body work to make it right and dump the shit out of it.
#8
![Default](images/icons/icon1.gif)
Hmmm, I keep pondering going 25mm in the front and 33 in the rear. Which would allow me to order from Adapt It as a standard 1 inch front and 1.3 inch for the rear. This I believe will allow for my stock lugs to remain on the car and not have to worry about buying shorter ones.
#9
I Roll Fenders
Join Date: Jan 2005
Location: Chesapeake
Posts: 7,083
Likes: 0
Received 0 Likes
on
0 Posts
![WishIHadaSilvia](images/reputation/reputation_pos.gif)
![WishIHadaSilvia](images/reputation/reputation_pos.gif)
![WishIHadaSilvia](images/reputation/reputation_pos.gif)
![WishIHadaSilvia](images/reputation/reputation_pos.gif)
![WishIHadaSilvia](images/reputation/reputation_pos.gif)
![WishIHadaSilvia](images/reputation/reputation_highpos.gif)
![WishIHadaSilvia](images/reputation/reputation_highpos.gif)
![WishIHadaSilvia](images/reputation/reputation_highpos.gif)
![WishIHadaSilvia](images/reputation/reputation_highpos.gif)
![WishIHadaSilvia](images/reputation/reputation_highpos.gif)
![WishIHadaSilvia](images/reputation/reputation_highpos.gif)
![Default](images/icons/icon1.gif)
They make bolt on spacers from 15mm on up. As in you will not have to change your studs out.
You realize with 25mm and 33mm spacers you'll be running 9 +30 and 9.5 +23 right? Will the 9 +30 clear your inner suspension? The 9 +30 will be 15mms further in then your 7 +40, that's pretty significant. The 9 +30 will have 8mm less inner clearance then the 8 +35 and stick out another 18mms...agian pretty significant. If you don't have problems with running whatever camber is necessary and don't mind running a 205/40 on a 9J then you should be able to pull it off....you will definitely need coilovers though. The rear fitment will stick out 31mms more then a 8 +35.
Post some pictures of celicas with the 8 +35 and 9.5 set up.
You realize with 25mm and 33mm spacers you'll be running 9 +30 and 9.5 +23 right? Will the 9 +30 clear your inner suspension? The 9 +30 will be 15mms further in then your 7 +40, that's pretty significant. The 9 +30 will have 8mm less inner clearance then the 8 +35 and stick out another 18mms...agian pretty significant. If you don't have problems with running whatever camber is necessary and don't mind running a 205/40 on a 9J then you should be able to pull it off....you will definitely need coilovers though. The rear fitment will stick out 31mms more then a 8 +35.
Post some pictures of celicas with the 8 +35 and 9.5 set up.
#10
![Default](images/icons/icon1.gif)
Well. With the 7in wheel I have just over 1inch of suck in from fender to outter tire. The rear has almost 2 inches. Now both front and rear have 1inch space from strut to inner tire. Which is why I figure running 15mm closer to strut will still allow clearance.
I have been wondering if the guy with 9.5 wide et35 is running a spacer that I am unaware of. Because that width should still only add half the needed fender sunkeness.
I have been wondering if the guy with 9.5 wide et35 is running a spacer that I am unaware of. Because that width should still only add half the needed fender sunkeness.