Notices
Tech Talk Anything technically related to your vehicle should be posted here. If you're looking to have work done, try one of the Regional Forums.

Z6 install into EG...no start issue

Thread Tools
 
Old 10-05-2009 | 05:09 AM
  #1  
ProbeGT-ZE's Avatar
ProbeGT-ZE
Thread Starter
I <3 Hikki Chan!
 
Joined: Dec 2002
Posts: 4,313
Likes: 0
From: 757
ProbeGT-ZE ProbeGT-ZE ProbeGT-ZE ProbeGT-ZE ProbeGT-ZE ProbeGT-ZE ProbeGT-ZE ProbeGT-ZE ProbeGT-ZE ProbeGT-ZE ProbeGT-ZE
Default Z6 install into EG...no start issue

Okay, I installed a '95 Z6 into my Dad's '92 Civic Hatch DX. The engine came with the Z6 harness, no distributor, IAC or TB. I used the B7s IAC and TB, as well as the distributor. The old engine's timing belt slipped and bent some valves but the distributor had a new coil, cap and rotor in it.

I've completed the install (the car is auto btw) and now I have no spark, all of the wires are connected and grounded. I'm just not getting any spark. There's 12v going to the coil/ignitor but nothing coming from the wires.
Old 10-05-2009 | 10:45 AM
  #2  
ProbeGT-ZE's Avatar
ProbeGT-ZE
Thread Starter
I <3 Hikki Chan!
 
Joined: Dec 2002
Posts: 4,313
Likes: 0
From: 757
ProbeGT-ZE ProbeGT-ZE ProbeGT-ZE ProbeGT-ZE ProbeGT-ZE ProbeGT-ZE ProbeGT-ZE ProbeGT-ZE ProbeGT-ZE ProbeGT-ZE ProbeGT-ZE
Default Re: Z6 install into EG...no start issue

Could anyone local let me try their dizzy on the car to see if that's my problem? I'd really appreciate it.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
spoonej1
Central VA
6
12-28-2007 02:06 PM
aZnAcCoRd02
Central VA
4
06-07-2006 11:39 PM
jdmteg21
NOVA/DC/MD
1
12-05-2005 01:17 PM
montman
757
9
11-01-2005 06:30 PM
montman
757
9
11-30-2004 08:12 PM



Quick Reply: Z6 install into EG...no start issue



All times are GMT -8. The time now is 03:47 AM.