i bought a light weight fly wheel for my da.didn't count the pressure plate bolt holes in the damn thing before i got the motor in and started to put it in together.any way,there is only 6 bolt holes in the light weight fly wheel, is this safe????does it sound right, or should i be worried?

 

alright hold up, clarify real quick. are there 6 bolts holding the flyhweel to the crank.

or

6 bolts holding the pressure plate/clutch disk to the flyhweel ?

If there is 6 bolts holding the flywheel to the crank, I WOULD be worried and would not start the car, there should be 8. If there is 6 bolts holding pressure plate/clutch to flywheel, than your fine. As long as you torqued everything to spec.



Correct amount for an integra.

There 8 bolts for flywheel to crank

There is 6 bolts holding pressure plate/clutch disk to flywheel.

 

vehicle is important

give us some info. chevelle? pinto? powerstroke? honda?

 

Sounds like a honda if you go by his username, B18. What brand is it? I would call up the manufacturer to see if you have the wrong one, because my guess is that you do.

 

its fine some have 6 some have 9

 

its in my da so its a b18,and the bolts are to the pres. plate thanks 4 the input