8 Second Nitrous/9 Second Motor 4-Link Mustang
Thread Starter
Settled..
Joined: Nov 2002
Posts: 1,350
Likes: 0
From: Richmond,VA
8 Second Nitrous/9 Second Motor 4-Link Mustang
Richard 804-986-7353
Richmond,VA
Trades: Lifted Trucks, Other Mustangs, 03/04 Cobras, Lightnings, Maybe something else try me?
$25,000 as it sits, $17,000 with my 408w installed, $10,000 as a roller
I have a Completely fresh Backhalfed Mustang up for Sale or Trade. All the car needs to be a SUPER nice piece is prep work and paint. The WHOLE Driveline has 10 runs on it. More pictures once it stops raining here in VA!
Previous best of car was 4.90's @ 140+ int he 1/8th with SBF and 2-stages. I have partially installed a plate system but have not finished. Current setup runs 9.30's on motor and is ready for the spray. Nitrous Convertor setup for 1500+hp.
I just spent $19,500 on the motor, $4400 on the trans and convertor, $1000 in fuel system, $1300 in new wheels and tires. NOT EVEN COUNTING THE MONEY SPENT ON CAR!
I have a TON in this car! Its built to last!
Here is all the info on car:
1990 LX Hatch
8.50 Certified NHRA and IHRA Cage
GT Front Bumper
4-link Backhalf by Alston- Big Tube 4-link not cheap stlye
Florida 5.0 Dash Kit with gauges
Dual Kirky Seats
All Interior in place except for back seat (Wheel Tubs)
Black Carpet
6in Outlaw Hood
All Glass except doors are lexan
Ed Quay Rear Wing
Strange Coil Overs in Front
QA1 Coil Overs in Rear
15x3.5 Stars Up front with ET Fronts
15x14 Rears with 32x14w Phoenix Slicks
Chute and Release
Full MSD system with Electronics
Pro Stick Shifter
AJE K-member
AJE Control Arms
AJE Cross member
Braced rear with 4.86 gears
Full JW Super Case Glide
JW Ultra Bell
JW 1.80 Straight Cut
Pro Brake
JW Roller Tailshaft
Trans Specialties 8in Nitrous Race Convertor $950
Motor 438w
Dart Pro Sportsman Block with Prep 4.125 Bore
Trick Flow Series R 235 Outlaw Heads by TEA Flow 377cfm @ 800
Eagle 4340 4.100 Crank
Eagle 4340 6.200 H-beam Rods
Diamond Custom 13 to 1 Pistons
Trick flow Pushrods
Trick Flow 1.6 Roller Rockers
Comp Pro Magnum Roller Lifters
Trick Flow Stud Girdles
Eldebrook Yates Style Intake for 4500 Carb
1050 CFM Dominator
Jesel Belt Drive
Comp .749 Solid Roller by Bennet Specs
Complete Stud Kit
Canton Stroker Oil pan
MSD Pro Billet Distrib
JW The "WheeL" flywheel
ATI Fluid Damper
CSI WaterPump
Afco radiator
Aeromotive A2000 Fuel System
10an Supply
NOS Big SHot Plate System
This is not junk and I wont trade for junk either.
Richmond,VA
Trades: Lifted Trucks, Other Mustangs, 03/04 Cobras, Lightnings, Maybe something else try me?
$25,000 as it sits, $17,000 with my 408w installed, $10,000 as a roller
I have a Completely fresh Backhalfed Mustang up for Sale or Trade. All the car needs to be a SUPER nice piece is prep work and paint. The WHOLE Driveline has 10 runs on it. More pictures once it stops raining here in VA!
Previous best of car was 4.90's @ 140+ int he 1/8th with SBF and 2-stages. I have partially installed a plate system but have not finished. Current setup runs 9.30's on motor and is ready for the spray. Nitrous Convertor setup for 1500+hp.
I just spent $19,500 on the motor, $4400 on the trans and convertor, $1000 in fuel system, $1300 in new wheels and tires. NOT EVEN COUNTING THE MONEY SPENT ON CAR!
I have a TON in this car! Its built to last!
Here is all the info on car:
1990 LX Hatch
8.50 Certified NHRA and IHRA Cage
GT Front Bumper
4-link Backhalf by Alston- Big Tube 4-link not cheap stlye
Florida 5.0 Dash Kit with gauges
Dual Kirky Seats
All Interior in place except for back seat (Wheel Tubs)
Black Carpet
6in Outlaw Hood
All Glass except doors are lexan
Ed Quay Rear Wing
Strange Coil Overs in Front
QA1 Coil Overs in Rear
15x3.5 Stars Up front with ET Fronts
15x14 Rears with 32x14w Phoenix Slicks
Chute and Release
Full MSD system with Electronics
Pro Stick Shifter
AJE K-member
AJE Control Arms
AJE Cross member
Braced rear with 4.86 gears
Full JW Super Case Glide
JW Ultra Bell
JW 1.80 Straight Cut
Pro Brake
JW Roller Tailshaft
Trans Specialties 8in Nitrous Race Convertor $950
Motor 438w
Dart Pro Sportsman Block with Prep 4.125 Bore
Trick Flow Series R 235 Outlaw Heads by TEA Flow 377cfm @ 800
Eagle 4340 4.100 Crank
Eagle 4340 6.200 H-beam Rods
Diamond Custom 13 to 1 Pistons
Trick flow Pushrods
Trick Flow 1.6 Roller Rockers
Comp Pro Magnum Roller Lifters
Trick Flow Stud Girdles
Eldebrook Yates Style Intake for 4500 Carb
1050 CFM Dominator
Jesel Belt Drive
Comp .749 Solid Roller by Bennet Specs
Complete Stud Kit
Canton Stroker Oil pan
MSD Pro Billet Distrib
JW The "WheeL" flywheel
ATI Fluid Damper
CSI WaterPump
Afco radiator
Aeromotive A2000 Fuel System
10an Supply
NOS Big SHot Plate System
This is not junk and I wont trade for junk either.
Last edited by ICULOKN; Dec 7, 2009 at 04:35 AM.
Registered Member
Joined: Oct 2009
Posts: 8
Likes: 0
From: United States
8 Second Nitrous/9 Second Motor 4 Link Mustang
I guess the Ford Racing supercharger kit you get to keep your warranty is about 5995. Its a little expensive in my opinion, but if you can pick up a leftover 2010 for say 27, then for 33k you could have a very nice car
Thread Starter
Settled..
Joined: Nov 2002
Posts: 1,350
Likes: 0
From: Richmond,VA
Re: 8 Second Nitrous/9 Second Motor 4 Link Mustang
No clue what your talking about my friend, I think your on the wrong post!