Notices
Automotive Discussion Automotive talk that is not technical can be posted here. Posts must address the general population.

Layed the smack down on the dyno at Virginia Speed.

Thread Tools
 
Old Dec 3, 2003 | 02:39 PM
  #1  
Cobra4B's Avatar
Cobra4B
Thread Starter
Fanboi
 
Joined: Jun 2003
Posts: 24,919
Likes: 0
From: Virginia Beach
Cobra4B Cobra4B Cobra4B Cobra4B Cobra4B Cobra4B Cobra4B Cobra4B Cobra4B Cobra4B Cobra4B
Default Layed the smack down on the dyno at Virginia Speed.


Run 1- 364.84
Run 2- 365.17

These are the uncorrected numers. It was 40 degrees outside, but they had the doors closed and no fan blowing so it wasn't cold inside the shop I'd say in the 60's. Torque was in the low 360's and very flat.
Run 1- 343.69
Run 2- 344.30
The are w/ the sae corrections.
(screw corrected numbers... the air was great and my car laid down almost 365 rwhp! 428 horsepower!)

They guys said that the uncorrected numbers are what my car was making that day at that time in those conditions, and the SAE numbers are to equate the variables and measure change.

My AF ratio was at a steady 12.5 at higher rpms on the first pull and 13.0 on the second.
The story:
Today at work someone gave me a flyer for a new speed shop called Virginia Speed. They'd only been there three weeks and hadn't even had a grand opening yet. Turns out I drove right by them on my way home from work every day. Looking for a helmet so I stoped by to check out their place.

Facilities are great. They have a "pro-shop" w/ lots of stuff, but are still gettin their safety equipment in stock (harnesses, seats, helmets, suite, etc.) They have a 10 ton lift, two engine dynos, a deisel dyno, and a brand new Dynojet.

I said what the heck does is your dyno up and running. They said sure! So I made a few pulls!

Last edited by Cobra4B; Dec 3, 2003 at 06:07 PM.
Old Dec 3, 2003 | 02:56 PM
  #2  
Jay's Avatar
Jay
VR-4ever
 
Joined: Jul 2003
Posts: 11,708
Likes: 0
From: not in russia.
Jay Jay Jay Jay Jay Jay Jay Jay Jay Jay Jay
Default

Nice numbers! I'll have to stop by and check out the shop.

2wd dyno right?
Old Dec 3, 2003 | 02:57 PM
  #3  
vmspionage's Avatar
vmspionage
SOI SOI SOI SOI SOI
 
Joined: Nov 2002
Posts: 5,683
Likes: 0
From: Newport News
vmspionage vmspionage vmspionage vmspionage vmspionage vmspionage vmspionage vmspionage vmspionage vmspionage vmspionage
Default

those corrected numbers look a little low for a Z06 with intake/exaust... then again stock i/e flows pretty damn well
Old Dec 3, 2003 | 02:58 PM
  #4  
1.8T3t04e's Avatar
1.8T3t04e
Registered User
 
Joined: Jun 2003
Posts: 727
Likes: 0
1.8T3t04e is an unknown quantity at this point
Default

id have to agree with you on corrections when its cold out... i dynoed 419whp uncorrected and 399 corrected...thats about 460-470hp to the crank... nice numbers by the way!!
also to see graphs click link in sig.
Old Dec 3, 2003 | 02:59 PM
  #5  
travisnd's Avatar
travisnd
VA
 
Joined: Jul 2003
Posts: 5,377
Likes: 0
From: Chesapeake
travisnd travisnd travisnd travisnd travisnd travisnd travisnd travisnd travisnd travisnd travisnd
Default

I hope to visit Va Speed very soon. How much was the dyno?
Old Dec 3, 2003 | 03:13 PM
  #6  
Cobra4B's Avatar
Cobra4B
Thread Starter
Fanboi
 
Joined: Jun 2003
Posts: 24,919
Likes: 0
From: Virginia Beach
Cobra4B Cobra4B Cobra4B Cobra4B Cobra4B Cobra4B Cobra4B Cobra4B Cobra4B Cobra4B Cobra4B
Default

$75.00 for 2 pulls w/ A/F wideband. $90.00 for 3 pulls w/ no A/F, and $120 for 3 pulls w/ A/F.

As for the corrected numbers being low... the car is supposed to have 385 hp stock and 343/.85 = 403.5 at the flywheel. Also, the car had no airflow over it. At speed the vortex will pick up more air.
Old Dec 3, 2003 | 03:22 PM
  #7  
NIC668's Avatar
NIC668
Registered Member
 
Joined: Dec 2002
Posts: 2,941
Likes: 0
NIC668 NIC668 NIC668 NIC668 NIC668 NIC668 NIC668 NIC668 NIC668 NIC668 NIC668
Default

where is this place located?
Old Dec 3, 2003 | 03:25 PM
  #8  
travisnd's Avatar
travisnd
VA
 
Joined: Jul 2003
Posts: 5,377
Likes: 0
From: Chesapeake
travisnd travisnd travisnd travisnd travisnd travisnd travisnd travisnd travisnd travisnd travisnd
Default

near lynnhaven mall off of International. website is www.vaspeed.com
Old Dec 3, 2003 | 06:07 PM
  #9  
Cobra4B's Avatar
Cobra4B
Thread Starter
Fanboi
 
Joined: Jun 2003
Posts: 24,919
Likes: 0
From: Virginia Beach
Cobra4B Cobra4B Cobra4B Cobra4B Cobra4B Cobra4B Cobra4B Cobra4B Cobra4B Cobra4B Cobra4B
Default

I added the dyno graph. Click the link in the top post.
Old Dec 3, 2003 | 06:15 PM
  #10  
Carter's Avatar
Carter
nannerpus, nannerpus
 
Joined: Jan 2003
Posts: 5,285
Likes: 0
From: pungo
Carter is infamous around these partsCarter is infamous around these partsCarter is infamous around these partsCarter is infamous around these partsCarter is infamous around these partsCarter is infamous around these partsCarter is infamous around these partsCarter is infamous around these partsCarter is infamous around these partsCarter is infamous around these partsCarter is infamous around these parts
Default

pretty looking curve. is it really mph at the bottom?



All times are GMT -8. The time now is 10:27 AM.