JDM Nissan S13 CA18DE-T Motorset (180sx) Motor Tranny Wiring Harness ECU
hey guys my 240sx was involved in an accident and the insurance people totaled it. Luckily the car was only hit on the passenger side and the Motor is Salvageable with no damage. Heres a Pic

This is a CA18DE-T rated at 160hp from factory on 7psi on the old turbo. It is currently set at around 9k rpms for a rev limiter, right there with the honda boys lol. Ive done a few upgrades that should put it somewhere around 170rwhp still running 7psi. This motor will bolt up using your stock S13 Motor mounts, Drive Shaft, and Tranny Mounts.
Im asking for 1500 O.B.O. I had the motor installed by MA-Motorsports and the Invoice for the work that was done (over 2500 in preventive maintenance.) It includes Water Pump, Spec Stage 2 Clutch, Timing Belt, Fixing the Wiring Harness Issues, Gaskets, and much more. Selling AS IS!!!!
I installed the SR20 T25 turbo on there. It has very little Shaft play and it was pulled from my friends CA18DET setup when he upgraded. I changed out the gaskets on the T25. It is also running a SR20 Turbo elbow.
This sale includes Motor, Transmission, ECU, and Wiring harness.
Pics of the Motor before install




Disregard the extra tranny. When i originally bought the motor it was an automatic that came with a 5spd i swapped the transmission over then had it taken to the shop.
My contact info:
Email: ronnie1677@msn.com
AIM: Rjthethug
Phone: 571 334-5550 (This is the best way to reach me call or text between 10am-8pm to come look at the motor.)
The car is sitting in my Driveway, i havent test it to see if it still runs cause i have no Intercooler Piping or a battery to power it.

This is a CA18DE-T rated at 160hp from factory on 7psi on the old turbo. It is currently set at around 9k rpms for a rev limiter, right there with the honda boys lol. Ive done a few upgrades that should put it somewhere around 170rwhp still running 7psi. This motor will bolt up using your stock S13 Motor mounts, Drive Shaft, and Tranny Mounts.
Im asking for 1500 O.B.O. I had the motor installed by MA-Motorsports and the Invoice for the work that was done (over 2500 in preventive maintenance.) It includes Water Pump, Spec Stage 2 Clutch, Timing Belt, Fixing the Wiring Harness Issues, Gaskets, and much more. Selling AS IS!!!!
I installed the SR20 T25 turbo on there. It has very little Shaft play and it was pulled from my friends CA18DET setup when he upgraded. I changed out the gaskets on the T25. It is also running a SR20 Turbo elbow.
This sale includes Motor, Transmission, ECU, and Wiring harness.
Pics of the Motor before install




Disregard the extra tranny. When i originally bought the motor it was an automatic that came with a 5spd i swapped the transmission over then had it taken to the shop.
My contact info:
Email: ronnie1677@msn.com
AIM: Rjthethug
Phone: 571 334-5550 (This is the best way to reach me call or text between 10am-8pm to come look at the motor.)
The car is sitting in my Driveway, i havent test it to see if it still runs cause i have no Intercooler Piping or a battery to power it.
Do you still have the motor? If so I can give you 800 for the motor only. I you can't do 800 are you will to part out the motor all i really need is the turbo let me know how much for the turbo.
Thread
Thread Starter
Forum
Replies
Last Post
adidas0533
Engine / Exhaust / Drivetrain
14
Apr 30, 2009 02:50 PM
JDM180SX
Interior / Electrical / Car Stereo
3
Apr 15, 2009 04:38 AM
slow40sx
Engine / Exhaust / Drivetrain
7
Mar 24, 2009 10:37 AM
sTohc4door
Import - ASIA
2
Feb 18, 2009 07:12 PM






