1989 BMW 325i 4dr E30
Name: Zak
Location: Portsmouth, Va
Contact: PM
Price: 900 firm w/out roof rack will include towers
I bought the car about 10 months ago. Back in December it was my only vehicle, then I purchased a s2000 and never drove the car. In February the car threw a rod and I am in the process of rebuilding it and preping it as a track car. With that said the car has no interior or radio, the blower motor for the heat never worked never was an issue to me, even in the winter. I recently bought a whole bunch of parts to go with the new motor. These items include:
New water pump, coil, distributor cap and rotor, plug wires, all new coolant hoses all from Bav Auto
Aluminum radiator and electric fan with aux fan wiring kit(shown in pictures) all this works I just haven't cleaned up the wires yet
solid motor mounts and trans mounts, z3 short shifter/shifter overhaul kit and tall delrin shift knob from bimmerworld
ebay header and x-pipe(not bad quality)
I know I am forgetting a few parts, excluding the motor and head(which has been recently rebuilt) I have over 2k in new parts.
There are some issues that I just don't have the time to address with cycling race season starting up, I just need a car that I can drive all over Va/NC and put a bike rack on. The issues are with the drive line I cannot get the driveshaft nut loose to pull the drive shaft out so I can take off the harmonic balancer so it doesn't hit the shift linkage(e30 guys will know what I am talking about) and the clutch won't disengage. This could be due to a simple bleed with the slave cylinder, like I said I just don't have time anymore. With all this said the car will have to be towed. Shell is clean with no rust, paint is a little oxidized and there are a few dents/dings. If you are interested just PM me and we can setup a time to see/hear the car run. Also, it has no leaks of any sort.
Car includes ellipsoids and complete grill, not installed.
Now for the pictures:

I have the door panel, just not installed as I had to fix the hinge.

Orange wire is part of the fan harness that needs to be cleaned up.



Please someone buy and finish it so I can miss it. :P
Location: Portsmouth, Va
Contact: PM
Price: 900 firm w/out roof rack will include towers
I bought the car about 10 months ago. Back in December it was my only vehicle, then I purchased a s2000 and never drove the car. In February the car threw a rod and I am in the process of rebuilding it and preping it as a track car. With that said the car has no interior or radio, the blower motor for the heat never worked never was an issue to me, even in the winter. I recently bought a whole bunch of parts to go with the new motor. These items include:
New water pump, coil, distributor cap and rotor, plug wires, all new coolant hoses all from Bav Auto
Aluminum radiator and electric fan with aux fan wiring kit(shown in pictures) all this works I just haven't cleaned up the wires yet
solid motor mounts and trans mounts, z3 short shifter/shifter overhaul kit and tall delrin shift knob from bimmerworld
ebay header and x-pipe(not bad quality)
I know I am forgetting a few parts, excluding the motor and head(which has been recently rebuilt) I have over 2k in new parts.
There are some issues that I just don't have the time to address with cycling race season starting up, I just need a car that I can drive all over Va/NC and put a bike rack on. The issues are with the drive line I cannot get the driveshaft nut loose to pull the drive shaft out so I can take off the harmonic balancer so it doesn't hit the shift linkage(e30 guys will know what I am talking about) and the clutch won't disengage. This could be due to a simple bleed with the slave cylinder, like I said I just don't have time anymore. With all this said the car will have to be towed. Shell is clean with no rust, paint is a little oxidized and there are a few dents/dings. If you are interested just PM me and we can setup a time to see/hear the car run. Also, it has no leaks of any sort.
Car includes ellipsoids and complete grill, not installed.
Now for the pictures:

I have the door panel, just not installed as I had to fix the hinge.

Orange wire is part of the fan harness that needs to be cleaned up.



Please someone buy and finish it so I can miss it. :P
Last edited by Griffin; Apr 23, 2010 at 04:40 PM.





