Notices
Tech Talk Anything technically related to your vehicle should be posted here. If you're looking to have work done, try one of the Regional Forums.

Honda idle problem...

Thread Tools
 
Old Dec 21, 2003 | 05:07 PM
  #1  
nickyroo's Avatar
nickyroo
Thread Starter
~
 
Joined: Nov 2002
Posts: 6,885
Likes: 0
From: FL / VA
nickyroo has disabled reputation
Default Honda idle problem...

hey my 1995 honda prelude (h23) recently has had an idle problem. when it is in park (A/T) the idle will surge to 1500 then drop to around 800 and do this until it goes into a gear. also, when applying the brakes in park the idle will drop around 600 and the car will almost stall. the pedal feels mushy, brake lines have been bled and fluid is fine. i think the two problems are related somehow seeing as how the idle drops VERY low when the brakes are pressed.

the idle problem sounds like a TPS problem to me, but i have no clue about the second problem. maybe a master cylinder? opinions needed, this crap's annoying and this is my daily driver
Old Dec 22, 2003 | 11:46 AM
  #2  
nickyroo's Avatar
nickyroo
Thread Starter
~
 
Joined: Nov 2002
Posts: 6,885
Likes: 0
From: FL / VA
nickyroo has disabled reputation
Default

ttt
Old Dec 22, 2003 | 03:00 PM
  #3  
The real Ryan's Avatar
The real Ryan
Type-R; Tight Car
 
Joined: Feb 2003
Posts: 3,429
Likes: 0
From: Seattle, WA
The real Ryan has disabled reputation
Default

i hate the iac valve (idle air control) its a sensor on the back of the throttle body. it should have three bolts holding it on. take it off and spray the screen with a engine cleaner. the screen can get stopped up and cuase this problem. it happend to me so i think its worth a shot.good luck
Old Dec 22, 2003 | 09:17 PM
  #4  
94b18c1's Avatar
94b18c1
emmett18
 
Joined: Nov 2002
Posts: 363
Likes: 0
From: Alexandria
94b18c1 has disabled reputation
Default

mine was the fast idle thermal control valve, under the TB. you wil have to take the TB off to get to it. the wax was loose from racing so much just tighten it if the I.A.C valve is fine
Old Dec 23, 2003 | 08:56 AM
  #5  
-Danimal's Avatar
-Danimal
Boner Jams
 
Joined: Feb 2003
Posts: 7,227
Likes: 0
From: Dirty ass kempsville
-Danimal -Danimal -Danimal -Danimal -Danimal -Danimal -Danimal -Danimal -Danimal -Danimal -Danimal
Default

sounds like a vacuum leak, cuse mine did that exact thing
Old Dec 23, 2003 | 11:12 AM
  #6  
nickyroo's Avatar
nickyroo
Thread Starter
~
 
Joined: Nov 2002
Posts: 6,885
Likes: 0
From: FL / VA
nickyroo has disabled reputation
Default

na its had a similar problem before, and it was the TPS. but it wasnt exactly like this. who knows though, might be a vacuum leak. i think it is more electronic though because it stops once it is out of park. i'll let yall know what i find.
Old Dec 23, 2003 | 11:18 AM
  #7  
S dot Camp's Avatar
S dot Camp
Asshole Supreme
 
Joined: Nov 2002
Posts: 4,843
Likes: 0
S dot Camp has much to be proud ofS dot Camp has much to be proud ofS dot Camp has much to be proud ofS dot Camp has much to be proud ofS dot Camp has much to be proud ofS dot Camp has much to be proud ofS dot Camp has much to be proud ofS dot Camp has much to be proud ofS dot Camp has much to be proud ofS dot Camp has much to be proud ofS dot Camp has much to be proud of
Default

Actually, the idle problem sounds like a Idle Air Control Valve. I am not sure about the Brake problem? Booster maybe, but they don't go bad normally.
Old Dec 23, 2003 | 06:18 PM
  #8  
zappas's Avatar
zappas
been around awhile.
 
Joined: Nov 2002
Posts: 3,846
Likes: 0
From: 757
zappas zappas zappas zappas zappas zappas zappas zappas zappas zappas zappas
Default

pcv valve fucked my idle...try that.
Old Dec 23, 2003 | 06:38 PM
  #9  
Boosted2003's Avatar
Boosted2003
Banned
 
Joined: Nov 2002
Posts: 2,538
Likes: 0
Boosted2003 is an unknown quantity at this point
Default

Originally posted by 0psi
Actually, the idle problem sounds like a Idle Air Control Valve. I am not sure about the Brake problem? Booster maybe, but they don't go bad normally.
he might have a leak on his brake booster line going to the manifold
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
2tonehatch
Tech Talk
9
Mar 22, 2006 04:33 PM
LastMinuteRacin
Tech Talk
20
Dec 31, 2005 12:34 AM
tegman96
Tech Talk
1
Oct 18, 2004 07:04 AM
2gcivi
Tech Talk
3
Jun 13, 2004 07:44 AM
The real Ryan
Tech Talk
10
Apr 23, 2003 04:11 PM




All times are GMT -8. The time now is 04:48 PM.