Bi xenon hid install: only passenger side working
08-12-2010, 08:08 PM
#1
Registered Member
Thread Starter
Join Date: May 2009
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Bi xenon hid install: only passenger side working
My old hid kit was low beam only so I'm now replacing it with a bi xenon kit and only the passenger side comes on. everything is grounded, I'm noticing"extra" connectors on the drivers side that the harness does not seem to need, basically I'm lost here
Any help would be great,thanks.
Any help would be great,thanks.
08-13-2010, 11:53 AM
#3
Boost is Better
Join Date: Oct 2004
Location: Richmond area
Posts: 2,456
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bi xenon hid install: only passenger side working
yea with the bi-xenon kits i've used you only plug in to one of the headlight harness's and run it to the other side. Just make sure at the other side there is a seperate ground for that ballast that has to be grounded. I missed it on one of my kits once so just double and quadruple check. If that doesn't work switch ballast and see if it comes on. If still not working swap bulbs and see what happens. If any of those fix the problem you know which part is bad.
Thread
Thread Starter
Forum
Replies
Last Post